Showing 91–99 of 260 results
-
BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)
$27.27 $15.00BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. ID (3/8 in. OD).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
2 in. Rigid Offset Conduit Nipple
$14.96 $8.23The 2 in. Offset Conduit Nipple is designed to provide an offset when flexibility is needed to finish off installations using multiple boxes and enclosures. It is made of corrosion-resistant zinc alloy and designed for use with rigid or IMC conduit. This Conduit Nipple meets UL and CSA requirements.
- Provides flexibility in multiple-box installations.
- Offsets the axis of raceways.
- Corrosion-resistant, high-strength zinc alloy.
- Can be installed indoors or outdoors.
- UL and CSA Listed.
Every item checked for quality -
Cadet Double-pole 15 Amp Line Voltage 120/240-volt TEP Series 5-2 Day Electronic Programmable Thermostat in White
$68.91 $37.90Save on your home heating bill with the precise technology of this programmable electronic thermostat. Features include touchscreen controls, a large and easy-to-read backlit display, four daily setting options, and more. This line voltage thermostat is compatible with fan-forced in-wall electric heaters, electric baseboard heaters, and with linear and panel convector heaters as well.
- Lower your heating costs with precise temperature control within one degree and simple electronic controls to manage usage.
- Line voltage thermostat compatible with in-wall and baseboard electric heaters (120/208/240-Volt).
- Simple 4-wire installation (double-pole) and includes an off setting.
- 5-2 day programming, with 4 daily events and 4 quick modes, including early start, vacation, comfort and economy.
- Tamperproof your program settings with a security lock.
- Choose temperature display in Celsius or Fahrenheit.
- 15 Amp.
- UL listed in the US and Canada for safety compliance.
Every item checked for quality -
NDS PVC Adapter, 4 in. DWV/SCH40 Hub X S&D Hub
$9.51 $5.23Connect 4 in. Drain Waste Vent (DWV)/Schedule 40 (SCH40) pipe to 4 in. Sewer and Drain (S&D) pipe with the PVC Adapter. The drain fitting also connects 4 in. DWV/SCH40 pipe to select drainage products compatible with 4 in. S&D connections such as channel drain outlets, drainage grates, and pop-up emitters. This adapter is used to connect two different pipe types. The adapter is made of polyvinyl chloride (PVC) and makes a Hub X Hub solvent-weld connection. Meets applicable ASTM standards. For use in non-pressurized underground sewer and drainage applications; maximum working pressure of 5 psi. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects-or we’ll replace it. NDS offers free tools such as the Home Drainage Center, Calculators, and NDS Stormwater Drainage mobile app to help make your project a success. Founded in 1972, NDS is the preferred choice of professionals and the leader in stormwater management solutions with proven products, tools, and support to help you get the job done right.
Every item checked for quality -
Home Decorators Collection Alberson 5 in. Brushed Nickel 2-Light LED Sconce
$99.96 $54.98Contemporary lines, ultra-sleek and high quality elegant finishes. This 2-light features frosted acrylic diffusers, vertically seated on a chrome frame. This LED wall sconce adds a clean, refined look to your space.
- Frosted acrylic shades.
- Brushed nickel finish.
- Energy efficient LED.
- Color temperature 3000K / Color Rendering Index(CRI) 90.
- Approx. 50,000-hours of lighting.
- Dimmable.
- Can be installed vertically and horizontally.
- Compatible Dimmer switches sold separately: Lutron -DVCL-153P / Lutron -MACL-153M / Lutron PD-6WCL / Lutron -CTCL-153PDH-WH / Lutron -TGCL-153PH-WH / Leviton -R62-06674-P0W / Eaton -AAL06-C1 / Leviton-R12-06672-1LW / Leviton-R50-IPL06-10M / Eaton-SAL06P-LA-K.
Every item checked for quality -
Apollo 1 in. PEX-A Expansion Sleeve/Ring (25-Pack)
$16.38 $9.01The Apollo ExpansionPEX 1 in. PEX-A Expansion Sleeve (25-Pack) is simple to install. Apollo ExpansionPEX are produced using PEX-A material. Apollo ExpansionPEX are required to create a secure Apollo ExpansionPEX connection. Apollo ExpansionPEX Expansion Sleeves are engineered with a bevel along the leading edge to ease pipe insertion and an integrated stop to ensure proper placement of the sleeve. The Apollo ExpansionPEX system is a comprehensive cold expansion piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Designed for use with Apollo ExpansionPEX fittings and pipe and is compatible with all expansion type (ASTM F1960) systems.
- Designed for use with 1 in. PEX-A pipe and 1 in. PEX-A barb fittings.
- Pro pack includes 25 sleeves.
- Requires expansion tool (sold separately) for use.
- For use exclusively with PEX-A (ASTM F1960) pipe and systems.
- Meets or exceeds ASTM F1960 and ASTM F877 standards.
- Meets UPC, IPC and cUPC standard.
- Rated to 200F and 200 psi.
Every item checked for quality -
Commercial Electric 8 ft. 6-Outlet All Metal Surge Protector
$34.64 $19.05With its heavy-duty metal case, the CE 6-Outlet Metal Surge Protector is ideal for use in workshops or garages. It provides power and protection from surges and offers a 15 ft. cord for long reach. It is all metal housing.
- 6-outlet.
- 8 ft. 14-Gauge cord.
- 1500-jouels.
Every item checked for quality -
1-1/2 in. 90-Degree Electric Metallic Tube (EMT) Elbow
$12.27 $6.75The corrosion-resistant 1-1/2 in. EMT 90 degree Elbow changes conduit direction while still allowing for easy wire pulling, thanks to its large radius. Usable indoors or outdoors. This elbow meets UL and CSA requirements.
- Enables a 90 degree change of direction in a run of EMT conduit.
- Made of galvanized steel for corrosion resistance.
- UL and CSA Listed.
- Large radius allows for easy wire pulling.
Every item checked for quality
