Showing 91–99 of 260 results
-
Commercial Electric 1-1/2 in. x 108 ft. Heavy Duty Tape, Black
$18.98 $10.44Heavy duty, pressure sensitive vinyl tape of 10mil thickness. It’s used for all types of mechanical and electrical applications. It’s flame retardant and can be used as primary insulation for splices at not more than 600-Volt.
- Quicker buildups and added abrasion protection.
- Flame retardant.
- Resistant to sun, water, oil, acids, alkalis, corrosive chemicals.
- Lead free.
Every item checked for quality -
Lithonia Lighting 2SP8 G 2 U316 A12 120 GESB 2-Light White Fluorescent Ceiling Troffer
$49.47 $27.21The Lithonia Lighting 2 ft. x 2 ft. Grid 2-Light T8 Fluorescent Troffer is easily installed recessed in grid ceilings and provides general illumination for residential and commercial applications. Light-weight design with smooth hemmed sides and smooth, inward formed end flanges allow for safe handling and easy installation.
- Energy-efficient T8 fluorescent technology.
- Steel door frame has superior structural integrity with premium extruded appearance and flush mitered corners.
- Steel construction is finished with a high-gloss, baked white enamel including a five-stage iron-phosphate pretreatment that ensures superior paint adhesion and rust resistance.
- 120-Volt electronic ballast powers two 31-Watt T8 U-bent fluorescent bulbs (sold separately).
- Suitable for installation in most 2 ft. x 2 ft. grid ceilings.
- Integral T-bar clips secure fixture in most 2 ft. x 2 ft. grid ceilings.
- UL listed to US safety standards.
- A12 acrylic lens features a reverse apex pattern for superior lamp obscuration and improved visual comfort.
Every item checked for quality -
#9, STRM005BN, Pull Down Kitchen Faucet in Brushed Nickel
$100.00 $55.00- Model: Star Mini Pull-Out Kitchen Mixer – STRM005BN.
- Function: Single Lever Pull-Down Kitchen Mixer/Faucet.
- Configuration: Single-Hole Installation.
- Finish: Brushed Nickel.
- Brand: Modern National.
- Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
- Installation Instructions are Included.
Every item checked for quality -
Charlotte Pipe 4 in. x 4 in. x 1-1/2 in. PVC DWV Wye Reducing
$38.82 $21.35PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140F. PVC is lightweight and easy to install. They require no special tools for cutting and can be installed with solvent cementing, threading, flanging and roll-grooved joining.
Every item checked for quality -
Powercare Y50 14 in. Semi Chisel Chainsaw Chain
$16.76 $9.22The PowerCare Saw Chain features Centri-Lube oil-ways on all drive links. These oil-ways allow lubrication to flow up through the drive links and to the rivets. This reduces friction, chain stretch and results in fewer adjustments needed to the chain. This chain has hardened, chromed semi chisel cutters that allow it to stay sharper longer and cut faster in dirty cutting conditions, ideal for consumer use.
- Powercare saw chain has chromed cutters for fast, smooth cutting and low kickback design for safety and durability.
- Chain fits many Homelite, McCulloch, Remington and Stihl chain saw models.
- Underwriters laboratories (UL) certified to American National Standards Institute (ANSI) standards for low kickback safety chai.
- Centri-lube self lubricating drive links that enhance chain life and reduce stretch.
- Pitch: 3/8 in. LP semi-chisel, gauge: 0.050 in., 50 drive links, file size: 5/32 in.
- Meets UL requirements for ANSI low kickback safety saw chains.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (3/8 in. O.D.) w/Safety+Plus2 Thermal Excess Flow Valve (33,400 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- The Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
1-1/4″ PVC Terminal Adapter
$1.67 $0.92TA25 Scepter rigid PVC conduit pipe and fittings are non-sparking and non-conducting, thereby eliminating the most dangerous second point of contact and phase to ground faults. The use of a separate grounding conductor in a Scepter PVC conduit system gives a complete and positive ground for the whole system.
Every item checked for quality -
60 in. W x 22 in. D x 35 in. H Free-standing Double Sinks Bath Vanity in Green with Straight Quartz Vanity Top
$1236.36 $680.00The Seneca collection features classical design enhanced by a smooth green finish, creating an aesthetic that mixes flair and function. Decorate your bathroom with this contemporary bathroom vanity set, this vanity offers generous storage space while maintaining a minimalistic look. Incorporate a classic vanity in your bathroom with a modern twist. Its freestanding frame is made from solid poplar wood in the finish of your choice, and built on tapered legs. The surface is made from Quartz with a backsplash that protects your walls from spills and splashes. It also accommodates the big rectangular ceramic basin in a white finish. The soft-closing drawers and shelf allow you to store an assortment of bathroom essentials. This vanity ensures both form and function in your bathroom or powder room for you and your guests.
- Overall dimensions are 60 in. W X 22in. D X 35 in. H.
- White quartz countertop which is an entire single layer top with 0.7 in. thickness for straight edge, includes backsplash.
- Arranged with 2-functional drawers with soft-close function and 1-shelf, which offered usable effortless storage.
- Countertop is pre-drilled for 8 in. widespread faucet for quick installation.
- Undermount ceramic rectangular sink with overflow hole to help promote a bacteria-free environment.
- Sliders are concealed soft-close function, ideal for your bathroom as it prevents any slamming noises.
- Unique designed golden brushed handle and knob.
- Faucet, Drain, Mirror and P-trap sold separately.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality
