Showing 100–108 of 260 results
-
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (3/8 in. O.D.) w/Safety+Plus2 Thermal Excess Flow Valve (33,400 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- The Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
2 in. Bolt-On Hub for Electrical Panels/Load Centers with B Openings
$20.47 $11.26Bolt-On Hub, along with its elongated mounting holes, reduces the need for costly conduit offsets and bends while allowing for easy and quick adjustments. The Square D by Schneider Electric 2 in. Hub is for use in Square D load centers, CSED devices and safety switches. This hub is a Type B size and is UL and CSA safety listed.
- For use in Square D load centers, CSED devices and safety switches.
- Can be used for outdoor load centers and safety switches.
- UL and CSA listed.
- Type B size.
- ANSI certified.
Every item checked for quality -
Apollo 1/2 in. x 1/2 in. CPVC CTS Slip Stainless Steel MPT Adapter
$6.58 $3.62The Apollo 1/2 in. CPVC x Male Threaded Transition Adapter is simple to install and is designed for transitioning from CPVC to alternative piping systems. It is designed for use within hot and cold water pressure piping systems in all commercial and residential applications. The CPVC x Male Threaded Transition Adapter features a female solvent weld socket and a male threaded stainless steel connection. The fitting is used in applications where a change in the piping material is necessary.
- Compatible with CPVC pipe.
- Solvent weld slip x stainless steel male pipe thread (MPT) connection.
- Not compatible with gases or compressed air.
- Used to transition from CPVC piping system to alternative piping systems.
- NSF Listed.
- Meets UPC, IPC and cUPC standard.
Every item checked for quality -
ClosetMaid SuperSlide 6.3 mm. Preloaded Back Wall Clips (48-Pack)
$14.47 $7.96The ClosetMaid Preloaded Back Wall Clips (48-Pack) help you anchor wire shelving to a drywall. Constructed from strong plastic, these clips install easily with the included push pins. Install easily with push pins (included).
- For use as part of the ClosetMaid fixed mount system.
- Should be spaced no further than 12 in. apart.
- Made of strong plastic.
- Install easily with push pins (included).
Every item checked for quality -
Charlotte Pipe 3 in. DWV PVC Double Sanitary Tee
$25.25 $13.89PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems. To be installed with solvent cementing, threading, flanging, and roll-grooved joining. All Charlotte Pipe products are manufactured in the USA.
Every item checked for quality -
Lithonia Lighting 2SP8 G 2 U316 A12 120 GESB 2-Light White Fluorescent Ceiling Troffer
$49.47 $27.21The Lithonia Lighting 2 ft. x 2 ft. Grid 2-Light T8 Fluorescent Troffer is easily installed recessed in grid ceilings and provides general illumination for residential and commercial applications. Light-weight design with smooth hemmed sides and smooth, inward formed end flanges allow for safe handling and easy installation.
- Energy-efficient T8 fluorescent technology.
- Steel door frame has superior structural integrity with premium extruded appearance and flush mitered corners.
- Steel construction is finished with a high-gloss, baked white enamel including a five-stage iron-phosphate pretreatment that ensures superior paint adhesion and rust resistance.
- 120-Volt electronic ballast powers two 31-Watt T8 U-bent fluorescent bulbs (sold separately).
- Suitable for installation in most 2 ft. x 2 ft. grid ceilings.
- Integral T-bar clips secure fixture in most 2 ft. x 2 ft. grid ceilings.
- UL listed to US safety standards.
- A12 acrylic lens features a reverse apex pattern for superior lamp obscuration and improved visual comfort.
Every item checked for quality -
Intermatic T100 Series 40 Amp 208-277V DPST 24 Hour Mechanical Time Switch Mechanism
$79.98 $43.99The T100 Series Mechanical Time Switch has proven it can stand the test of time. These dependable time switches can handle electrical loads up to 40 A per pole and allow for up to 12 ON/OFF operations per day. A manual override switch provides added convenience.
- Direct 24-hour control of most loads.
- Up to 12 ON/OFF operations each day with minimum ON/OFF times of one hour.
- Manual override.
- One ON and one OFF tripper included.
- Mechanism only.
- Perfect for use with indoor/outdoor lighting, signs, filters, electric fences, fans, conveyors, pool heaters, blowers, pumps and more.
Every item checked for quality -
John Deere 42 in. Deck Drive Belt for Select John Deere Mowers
$55.96 $30.78When you need to replace your lawn mower belt consider the John Deere 42 in. Mower Belt for your mower. The more Kevlar cords help provide strength for your mower’s high horsepower demands. The flexible cores allow for proper routing so they stay in the pulley groove.
- For replacing your John Deere riding mower belts.
- Fits models: D100, D105, D110, D120, D125, D130, LA100, LA105, LA110, LA115, LA120, LA125, LA135, LA110, LA120.
- More Kevlar cords help provide strength for high horsepower demands.
- Belt cover provides a smooth blade and clutch engagement.
- Reduced belt rollover in pulleys helps ensure a longer belt life.
- GX20072 Cross-References to John Deere UC32883.
Every item checked for quality
