Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
  2. Shop
    3. Page 27

Showing 235–243 of 260 results

Filters

  • BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)

    BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. ID (3/8 in. OD).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • Open Box – Sterling Wall Mounted Shower Caddy in White Finish (10-Piece)

    STORE+ is a fully customizable storage bath or shower system with interchangeable accessories to eliminate clutter and organize your shower to fit your needs. Interchangeable corner accessories maximize your showering space. Dishwasher safe shelves and bins.

    • Open Box: Missing hooks; other parts are in perfect condition.
    • Original Retail Price: $99.00.
    • Model# 88028700-0.
    • STORE+ accessory kits meet your storage and organizational needs.
    • Basic accessory kit includes: 2 caddies, 2 soap dishes with towel bars, 2 hooks, 4 rimmed shelves.
    • Interchangeable corner accessories, maximize storage space- the way you want.
    • Dishwasher safe shelves and bins snap into place, no tools required.
    • Constructed of plastic.
    • White finish on all pieces.
    Green checkmark of qualityEvery item checked for quality
    $54.55 $30.00

  • Qep Tile Tools 10-154 Loop Pile Cutter

    Use the QEP Tile Tools 10-154 Loop Pile Cutter for your carpet cutting tasks. It features a 50-degree blade angle for cleaner smoother precise cuts. The Roberts cutter has a quick-release blade-replacement feature for fast blade changes and an extra-long nose for better row separation. The ergonomic grip provides comfort and efficiency and the cutter…

    Green checkmark of qualityEvery item checked for quality
    $16.56 $9.11

  • SunTouch Floor Warming 4 ft. x 30 in. 120-Volt Radiant Floor Heating Mat (Covers 10 sq. ft.)

    The SunTouch Floor Heating Mat measures 4 ft. x 30 in. and offers an ultra-thin, low-profile system that installs beneath tile, stone and even vinyl or laminate flooring. Its ideal for remodeling bathrooms and kitchens to add radiant floor heating and offers an upscale option when designing new construction floor warming. Dual-wire technology reduces electromagnetic fields (EMF) to ultra-low levels. The mat is an energy-efficient touch of radiant floor warming luxury for your home, is UL listed, and comes with detailed installation instructions.

    • Install the heated floor mat below ceramic or porcelain tile, stone or brick floors or in a self-leveling mortar bed below vinyl floors, floating wood- and laminate floors.
    • For indoor floor-warming use only.
    • Open-weave construction for easy application of thin-set and mortar without compromising the bond of your floor covering to the sub-floor.
    • Dual wire technology keeps EMF to ultra-low levels.
    • UL listed for safety.
    • Energy efficient, inexpensive to operate.
    • Armored power lead wire straight to the electrical box, no conduit required.
    • Single-point power connection to facilitate layout and wiring.
    • Mats can be connected in parallel for larger floor surfaces.
    • Can be combined with a programmable thermostat control (not included).
    Green checkmark of qualityEvery item checked for quality
    $169.51 $93.23

  • 1-1/4 to 3/4 Conduit Reducer

    • Fitting Type: Reducer.
    • For Conduit Type: Intermediate (IMC); Rigid.
    • Connection Type: Threaded.
    • Material: Steel.
    • Insulation: Non-Insulated.
    • Area of Application: Non-Hazardous.
    • Trade Size: 1-1/4 to 3/4.
    Green checkmark of qualityEvery item checked for quality
    $8.51 $4.68

  • HALO 8 in. Selectable CCT and Lumens New Construction Canless Recessed Integrated LED Kit

    The HLB8 is a 8 in. ultra-thin LED lens downlight with remote driver/junction box suitable for new construction and remodel applications. Field selectable color temperature and high color rendering provide excellent color performance. Simplified installation in drywall or suspended ceilings eliminates recessed cans saving time and money. Installs from below the ceiling in as little as 3-1/2 in. plenum height, can be used in direct contact with insulation and is airtight. Use for general area lighting in low to medium height ceilings where energy savings, long life and economy are required.

    • Suitable for IC and non-IC applications.
    • 120-Volt to 277-Volt with 0-Volt to 10-Volt dimming.
    • 90 CRI (min), R9 50 and color accuracy within 4 SDCM.
    • Dimmable down to 5%.
    • Wet location listed for showers and protected ceilings.
    • ENERGY STAR.
    Green checkmark of qualityEvery item checked for quality
    $61.47 $33.81

  • 1-1/2 In. Male Threaded & Socket Terminal Adapter

    Adapter ideal for adapting PVC (polyvinyl chloride) conduit to boxes, threaded fittings, and metallic systems. Male threads on 1 end, socket end on other. UL (Underwriter’s Laboratories) listed.

    Suitable for: SCH 40 and 80 Rigid/Non-Metallic Conduits

    Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.. UL listed, RoHS Compliance.

    Green checkmark of qualityEvery item checked for quality
    $1.89 $1.04

  • Steel City 2-Gang New Work Square Device Electrical Wall Box (Case of 10)

    Mount electrical switches and receptacles to wood or metal wall studs with the 2-Gang Square Device Wall Box. This wall box can be used in indoor and outdoor residential and commercial applications. It offers welded construction with 3/4 in. and 1/2 in. eccentric knockouts and ground bump.

    • Model # 2G4D1234-10R.
    • Use to mount electrical switches and receptacles to wood or metal wall studs with 3/8 in. offset.
    • Zinc-galvanized steel is rust- and corrosion resistant.
    • Compatible with electrical conduit wiring in indoor/outdoor residential and commercial applications.
    • UL Listed.
    • 17 knockouts for use with 1/2 in. and 3/4 in. connections.
    Green checkmark of qualityEvery item checked for quality
    $65.29 $35.91

  • #7, BrassCraft 3/8 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn Angle Valve

    The BrassCraft 3/8 in. FIP Inlet x O.D. Compression Outlet 1/4-Turn Angle Valve allows you to control water flow easily and quickly. It’s used where the water pipe enters the room from the wall and it controls flow to plumbing fixtures including washing machines, toilets, faucets and more. This valve allows you to simply turn the handle when you need to do repairs or maintenance without turning the water off to the whole house.

    • Compatible with iron pipe.
    • Smooth on/off flow control with a quarter turn (90 degrees ) turn of the handle.
    • One-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • One-piece body construction for strength, durability and long-lasting performance.
    • Chrome-plated brass.
    • Temperature rating: 40 degrees to 160 degrees F.
    • Pressure rating: 125 PSI maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00
X