Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
  2. Shop
    3. Page 15

Showing 127–135 of 260 results

Filters

  • BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve, #73

    BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.

    • Compatible with PEX, copper and CPVC.
    • Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
    • Installation ready: requires no special tools, soldering or glue for a watertight seal.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Pre-inserted tube stiffener is “installation ready” for a faster connection.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • Chrome-plated brass.
    • Temperature rating: 40° to 160°F.
    • Pressure rating: 125 psi maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • Orbit 1 in. FNPT Automatic Inline Angle Valve with Flow Control

    This Orbit 1 in. PVC FPT Automatic Inline Angle Valve with Flow Control features a slow closure speed that helps reduce water hammer and system wear. The valve operates at flow rates from 0.5 – 40 GPM.

    • Use to replace or upgrade your existing sprinkler valves.
    • Inlets on the bottom and the side allow easy installation.
    • Operates at flow rates from 0.5 – 40 GPM.
    • Operates between 15 – 125 psi.
    • PVC construction is UV resistant.
    • Stainless-steel spring.
    • Flow control enables you to increase or decrease the flow of water through the valve to meet your watering needs.
    • Wire rod design is self cleaning.
    • Manual external bleed.
    • Manual on/off lever.
    • Slow closure speed helps reduce water hammer and system wear.
    • Heavy-duty diaphragm for durability.
    Green checkmark of qualityEvery item checked for quality
    $16.96 $9.33

  • Hampton Bay Cairo Low Voltage Square Transitional Black Integrated LED Outdoor Landscape Path Light With Bubble Glass (1-Pack)

    Bubble glass with die-casts construction suitable for outdoor using. A diffused glow onto paths, walkways, low-lying ground cover or around a deck. A stake is included for easy insertion into the ground and the rugged metal construction with black finish is corrosion resistant to withstand outdoor environs.

    • Includes 1-path light with integrated led module, stake and fixture wire with clip connector.
    • High luminous efficiency with bubble glass.
    • Rugged metal construction with black finish is ideal for outdoor installation.
    • Stake design installs easily into the ground to illuminate paths, walkways and low-lying ground cover.
    • Transformer and wire are required for use of this product- sold separately.
    Green checkmark of qualityEvery item checked for quality
    $34.96 $19.23

  • Steel City 1-Gang New Work Metal Electrical Utility Box, Silver (Case of 20)

    For indoor electrical box installations. This 1-Gang Utility Box features an extension-ring design. Constructed of durable steel and has as 1/2 in. knockouts.

    • Model #5936112-20R.
    • Made of durable metallic materials.
    • UL Listed.
    • Extension-ring design.
    • For indoor use.
    Green checkmark of qualityEvery item checked for quality
    $43.11 $23.71

  • HALO 4 in. 2700K-5000K Selectable CCT Surface Integrated LED Downlight Recessed Light with White Round Trim

    The Halo Surface LED Downlight (SLD4) is an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. Equipped with 5 color temperature settings ranging from soft (2700K) to daylight (5000K), this SLD4 (4 in.) is designed for installation in many standard and fire-rated 3-1/2 in. and 4 in. round or octagon junction boxes. Supply wire adapater with LED quick wiring connector included. Suitable for residential or commercial installations. Ideal for closets, storage areas, attics and basements.

    • Fixture is built to last with maintenance-free energy efficient LEDs with 50,000-hours of life.
    • Equipped with 5 color temperature settings ranging from warm (2700K) to daylight (5000K).
    • 90 CRI title 24 Compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
    • Flexible mounting with included junction box bracket.
    • ENERGY STAR qualified for energy conservation and savings up to $400 savings over the life of the ceiling light fixture.
    • Can be installed in 3-1/2 in. x 2 in. and 4 in. x 1-1/2 in. junction boxes for new construction, remodel and retrofit applications.
    • Compatible with most 4 in. housings.
    • Designed for continuous dimming capability to nominally 5% with many 120-Volt Leading Edge (LE) and Trailing Edge (TE) phase control dimmers.
    • Wet location, damp location, air-tite, insulation contact rated and can be used with fire-rated ceiling system.
    • SLD retrofit kit sold separately.
    Green checkmark of qualityEvery item checked for quality
    $24.96 $13.73

  • Quad Breaker 1 – 2P 20A X 1 – 2P 30A Ct

    Ctl Type Common Trip 2-2P Circuit Breaker 120/240 Vac 2 Wide (1/2 Per Pole) 10 000 Aic.

    Green checkmark of qualityEvery item checked for quality
    $24.73 $13.60

  • Halo HLBSL 4 in. Adjustable CCT Canless IC Rated Dimmable Indoor, Outdoor Integrated LED Recessed Light Kit

    Halo HLB4 Selectable Series Downlights are complete 4 in. ultra-thin canless recessed lights designed for use in new construction, remodel and retrofit installation, without needing a housing or j-box. Ultra-slim design goes where LED can lights can’t. Choose your color temperature directly on the fixture. With the flick of a switch, you can choose between 3 color temperatures ranging from warm (3000K) to daylight (5000K) prior to installing into your ceiling. This Halo recessed lighting fixture features an LED driver that offers 120-Volt dimming capability. The HLB4 LED recessed lighting soft lens provides uniform illumination and wet location listing.

    • Housing and J-box not required, easy to install spring clips firmly secure recessed LED lights in ceiling.
    • Repositionable driver junction box.
    • Selectable CCT allows customization to create perfect lighting for your home all throughout your house.
    • Choose between 3-discrete color temperature settings ranging from soft (3000K) to daylight (5000K).
    • LED recessed lights with attractive round Halo matte white finish and textured lens to provide smooth light distribution.
    • LED recessed lights are built to last with maintenance-free energy efficient LED’s, eliminating your need to use and replace bulbs.
    • LEDs have 35,000-hours of life, eliminating your need to use and replace bulbs.
    • Good brightness at 675 Lumens (at 3000K color temperature) recessed lights provide illumination to any room.
    • 90 CRI, title 24 Compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
    • Air-tite, wet rated recessed lights can be used in shower and outdoor light applications.
    • Designed for continuous dimming down to 5%, standard 120-Volt electronic low-voltage dimmer is recommended for best performance.
    • Halo 4 in. LED lights are IC rated, for direct contact with insulation.
    • 4 in. recessed lighting produces light equivalent to a 60-Watt bulb yet uses just 12-Watt (see product spec sheet to confirm).
    • 1/2 in. D makes this product great for use in shallow ceilings.
    • Fits into applications with as little as 3.5 in. plenum clearance.
    • ENERGY STAR qualified for energy conservation.
    Green checkmark of qualityEvery item checked for quality
    $13.87 $7.63

  • 2″ Insulated Ground Bushing

    Bridgeport 386-DC 2″ Die Cast w/Plastic Metaliner Insulated Grounding Bushing for Rigid/IMC Conduit.

    • Material: Ball Burnished Mirror Smooth Die-Cast Zinc.
    • Approval: UL 514B, UL (Canada and US).
    • Used On: IMC/Rigid Conduit.
    • Additional Information: ROHS Compatible; Applicable Standard Federal Specification A-A-50553, NEMA FB-1; Insulator Material Nylon; Insulation Temperature 150 Deg C.
    • Type: Threaded.
    • Trade Size: 2 Inch.
    • Wire Size: 14 AWG Solid to 1/0 AWG Stranded.
    • Lug Type: Tin Electroplated 6061-T6 Aluminum Alloy.
    • Throat Type: Insulated.
    • Diameter: 2-5/8 Inch.
    • Height: 1/16 Inch.
    Green checkmark of qualityEvery item checked for quality
    $4.67 $2.57

  • Hampton Bay Universal Matte Black Ceiling Fan LED Light Kit

    The Hampton Bay Universal Light Kit is designed to complement your ceiling fan and add functionality. The universal design translates to easy installation and is compatible with most ceiling fans. The matte black finish and decorative cage design adds a modern industrial look. One 6.5-Watt LED bulb included.

    • Matte black finish.
    • For indoor use only.
    • Decorative industrial cage design.
    • Universal design is compatible with most ceiling fans.
    • Easy installation.
    • Convenient pull-chain control.
    • 1 medium base clear 6.5-Watt LED bulb included (A19 shape / 810 lumens / 2700K).
    • Can be dimmable if installed with a dimming switch or remote control with dimming function.
    • Finishes shown are representative of the item, actual finish may vary slightly.
    Green checkmark of qualityEvery item checked for quality
    $51.96 $28.58
X