Showing 127–135 of 260 results
-
Cadet Double-pole 15 Amp Line Voltage 120/240-volt TEP Series 5-2 Day Electronic Programmable Thermostat in White
$68.91 $37.90Save on your home heating bill with the precise technology of this programmable electronic thermostat. Features include touchscreen controls, a large and easy-to-read backlit display, four daily setting options, and more. This line voltage thermostat is compatible with fan-forced in-wall electric heaters, electric baseboard heaters, and with linear and panel convector heaters as well.
- Lower your heating costs with precise temperature control within one degree and simple electronic controls to manage usage.
- Line voltage thermostat compatible with in-wall and baseboard electric heaters (120/208/240-Volt).
- Simple 4-wire installation (double-pole) and includes an off setting.
- 5-2 day programming, with 4 daily events and 4 quick modes, including early start, vacation, comfort and economy.
- Tamperproof your program settings with a security lock.
- Choose temperature display in Celsius or Fahrenheit.
- 15 Amp.
- UL listed in the US and Canada for safety compliance.
Every item checked for quality -
Brondell CleanSpa Enhanced Hand-Held Bidet
$54.98 $30.24The Brondell CleanSpa Enhanced Hand Held Bidet provides an affordable and easy way to upgrade your health and hygiene. The CleanSpa Enhanced Bidet Sprayer can be DIY installed in minutes by connecting to your toilets clean water supply line and it features enhanced total control thumb controlled water pressure adjustment. A metal T-valve with brass core allows additional water pressure adjustment and acts as a shutoff mechanism after each use along with a flexible metal spiral bidet hose with patented inner woven core. Only parts of the highest quality are used and all necessary parts for standard installation are included. Start achieving a more complete clean today.
Every item checked for quality -
BrassCraft Safety+PLUS2 Thermal Excess Flow valve (36,800 BTU) 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector
$27.27 $15.00BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. ID (3/8 in. OD).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
RUGPADUSA Essentials 8 ft. x 10 ft. Hard Surface 100% Felt 1/4 in. Thickness Rug Pad
$58.95 $32.42If you’re looking for some cushion under your rugs that won’t break the bank, RUGPADUSA Essentials is for you. These felt rug pads are 1/4 in. thick 100% recycled fiber. They add comfort underfoot and help with noise reduction on rugs that don’t require a non-slip pad. Our pads are manufactured and made to withstand heavy traffic while protecting your rugs and your floors. We stock Essentials in the most common sizes for rugs, and they can easily be modified with a pair of household scissors.
- 100% felt padding buffers foot traffic, traps dirt, and prolongs the life of rugs and floor surfaces.
- Needle-punched felt made.
- Dense, thick felt provides cushion underfoot.
- Will not strip, discolor, or damage any floor surfaces.
- Made with 100% pre-consumer, recycled fibers for long lasting comfort and durability.
- Low VOC emissions keep your family safe from harmful irritants.
Every item checked for quality -
HALO 4 in. 2700K-5000K Selectable CCT Surface Integrated LED Downlight Recessed Light with White Round Trim
$24.96 $13.73The Halo Surface LED Downlight (SLD4) is an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. Equipped with 5 color temperature settings ranging from soft (2700K) to daylight (5000K), this SLD4 (4 in.) is designed for installation in many standard and fire-rated 3-1/2 in. and 4 in. round or octagon junction boxes. Supply wire adapater with LED quick wiring connector included. Suitable for residential or commercial installations. Ideal for closets, storage areas, attics and basements.
- Fixture is built to last with maintenance-free energy efficient LEDs with 50,000-hours of life.
- Equipped with 5 color temperature settings ranging from warm (2700K) to daylight (5000K).
- 90 CRI title 24 Compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
- Flexible mounting with included junction box bracket.
- ENERGY STAR qualified for energy conservation and savings up to $400 savings over the life of the ceiling light fixture.
- Can be installed in 3-1/2 in. x 2 in. and 4 in. x 1-1/2 in. junction boxes for new construction, remodel and retrofit applications.
- Compatible with most 4 in. housings.
- Designed for continuous dimming capability to nominally 5% with many 120-Volt Leading Edge (LE) and Trailing Edge (TE) phase control dimmers.
- Wet location, damp location, air-tite, insulation contact rated and can be used with fire-rated ceiling system.
- SLD retrofit kit sold separately.
Every item checked for quality -
1-1/2 In. Male Threaded & Socket Terminal Adapter
$1.89 $1.04Adapter ideal for adapting PVC (polyvinyl chloride) conduit to boxes, threaded fittings, and metallic systems. Male threads on 1 end, socket end on other. UL (Underwriter’s Laboratories) listed.
Suitable for: SCH 40 and 80 Rigid/Non-Metallic Conduits
Safe, non-conductive. For adapting SCH 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.. UL listed, RoHS Compliance.
Every item checked for quality -
Greenworks PRO 60V Dual Port Turbo Charger
$137.00 $75.35Our 6.0 Amp hour (Ah) battery charger is designed to charge all Greenworks 60-Volt tools. Charges includes a diagnostic LED indicator communicating current charge level, battery temperature and indicate battery issues.
- Simultaneously charges 2 batteries.
- Compatible with all Greenworks 60-Volt batteries.
- Can be used bench top or mounted on the wall.
Every item checked for quality
