Showing 127–135 of 260 results
-
HALO 8 in. Selectable CCT and Lumens New Construction Canless Recessed Integrated LED Kit
$61.47 $33.81The HLB8 is a 8 in. ultra-thin LED lens downlight with remote driver/junction box suitable for new construction and remodel applications. Field selectable color temperature and high color rendering provide excellent color performance. Simplified installation in drywall or suspended ceilings eliminates recessed cans saving time and money. Installs from below the ceiling in as little as 3-1/2 in. plenum height, can be used in direct contact with insulation and is airtight. Use for general area lighting in low to medium height ceilings where energy savings, long life and economy are required.
- Suitable for IC and non-IC applications.
- 120-Volt to 277-Volt with 0-Volt to 10-Volt dimming.
- 90 CRI (min), R9 50 and color accuracy within 4 SDCM.
- Dimmable down to 5%.
- Wet location listed for showers and protected ceilings.
- ENERGY STAR.
Every item checked for quality -
Potrisers Invisible Pot Feet for Containers & Statuary
$3.98 $2.19POTRISERS, made from 100-percent recycled material, were designed to be an eco-friendly, indestructible and low profile alternative to decorative pot feet, trays and trivets. While remaining hidden, POTRISERS can be fitted to heavy, pre-planted containers. Rubberized material grips surfaces while providing cushioning on hard or uneven surfaces such as wood, concrete, aggregate, compacted materials or stone. POTRISERS come in both retail and bulk packaging. Designed to protect and hide drip lines, POTRISERS allow for easy cleaning and provide crucial drainage needed for healthy plants. By floating containers off the ground, pots are less likely to freeze and crack in cold temperatures. Stack them to level planters on slopes. Suggested Use: Equally space 4 risers beneath outside edges of pot. If using with a tray – place a set below the tray to prevent water rings or condensation on surfaces, and within the tray beneath the pot to allow the pot to drain freely. POTRISERS have been field tested by the Engineering Laboratory of the University of Washington for strength and field tested for durability. This standard riser, recommended for small to medium pots and statuary, will support up to 1600-pound (per set of 4).
Every item checked for quality -
Apollo 3/4 in. Brass PEX-B Barb x 3/4 in. Male Pipe Thread Adapter (5-Pack)
$16.45 $9.05The ApolloPEX 3/4 in. Brass PEX Barb x 3/4 in. Male Pipe Thread Adapter is simple to install. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX adapters can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Most economical piping system available.
- Meets UPC, IPC and cUPC standard.
- Can secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves.
- NSF listed.
- Barb x MIP connection for PEX plumbing systems.
- Maximum working pressure of 200 psi and maximum temperature of 200 degree F.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (3/8 in. O.D.) w/Safety+Plus2 Thermal Excess Flow Valve (33,400 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- The Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
24-inch, Rubbermaid Commercial Maximizer Dust Mop Refill with Hook & Loop Backing
$18.98 $10.44The 24-inch Rubbermaid Commercial Products Maximizer Dust Mop Pad is made to clean and dust for the long haul. Designed with durability in mind, the all-sewn construction can be commercially washed up to 40 times without bleach. The hook-and-loop back attaches securely to the frame, so you don’t have to worry about it coming loose—a handy feature when you’ve got a long cleanup ahead. This dust mop pad is ready to go when you get it. It’s been pre-treated so it will work just right the first time you use it. Designed to perform in a variety of common spaces, Maximizer cleaning tools deliver fast, consistent results shift after shift.
Every item checked for quality -
Hampton Bay Wickford 1-Light Weathered Bronze Outdoor Pendant Light Fixture with Clear Beveled Glass
$49.96 $27.48The Wickford Collection from Hampton Bay features transitional, American style outdoor lighting suitable for a wide range of home styles from traditional to farmhouse. The Wickford outdoor hanging pendant light is designed to bring functional lighting to covered patio and porch spaces. This fixture has clear beveled glass sides and matching beveled glass roof panels. A single light bulb inside the fixture body can be easily accessed through the open bottom, and shines out brightly from inside the glass. A matching weathered bronze chain is included that allows for an adjustable height and slope ceiling compatibility. Shop the Wickford Collection for coordinating exterior lighting fixtures.
- Weathered bronze finish with clear, beveled glass.
- Uses (1) medium E26 base 100-watt bulb, not included.
- LED light bulb compatible, use 100-watt equivalent.
- Fixture is open at the bottom to allow for easy light bulb access.
- Installation instructions and hardware included.
- Includes 5-ft. chain for an adjustable height up to 73.6-in.
- Can be used on a sloped/angled outdoor ceiling.
- Round ceiling canopy measures 5-in. diameter.
Every item checked for quality -
HDX 600 Lumens Integrated LED Clamplight
$19.98 $10.99This 600 Lumens Integrated LED Clamplight presents a unique ultra-thin design that is compact and convenient to use in different sites, such as the garage or workroom. Supplying with the separate magnetic metal base to have 4-in-1 function which makes it to be a hanging lamp, hand-Held work lamp, table lamp or magnetic lamp freely according to different demands. This light is built with the LED integrated, ensuring long-lasting and energy-efficient illumination.
- High power SMD LED with 600 Lumens light output.
- Ultra-thin panel for saving freight, store shelves and storage places.
- With metal base, 4-in-1 function: hanging lamp, hand-held work lamp, table lamp and magnetic lamp.
- Ball joint for easy positioning.
- SPT-2-8/2 in. 5 ft. cord.
- Energy saving durable on/off power switch.
- Full metal clamp with scratch-resistant vinyl sleeve.
- Frosted lens decreases glare and provides softer and even light distribution for user-friendly.
- Heavy duty structure.
Every item checked for quality -
BrassCraft 1/2 in. Nominal Push Connect x 1/2 in. FIP x 20 in. SpeediOne Braided Faucet Connector and 1/4-Turn Straight Valve
$3.64 $2.00Original Retail Price: $17.75.
BrassCraft’s push connect one-piece water supply combines their trusted brass water valve with their flexible braided polymer connector for one quick easy-to-install solution. BrassCraft’s one-piece connection features push connect technology on the valve inlet and a hand-tighten wing nut on the outlet to provide a significant savings in installation time and cost. Push connect valve inlet requires no special tools to install and comes equipped with a pre-inserted tube stiffener to make the product ideal for copper, PEX and CPVC piping systems. The braided polymer fibers of the connector are designed to bend freely without kinking or crimping in tight quarters and resist corrosion caused by chemicals found in common household, tile and glass cleaners. In addition, its reinforced inner hose resists corrosion under harsh water conditions.
- 1-piece unit combines valve and supply line.
- Saves time with one less connection.
- No special installation tools required.
- Installation ready with pre-inserted tube stiffener.
- Fast, reliable and secure.
- Compatible with copper, PEX and CPVC.
- Remove with combination removal tool or 5/8 in. open end wrench.
- Connector bends freely without kinking or crimping in tight quarters.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality -
WIEGMANN Outdoor Enclosure 6 in. x 6 in. x 4 in. NEMA 3R Screw Cover/Pull Box
$44.27 $24.35WIEGMANN 6 In. x 6 In. x 4 In. rain-proof screw cover box is made of pre-galvanized steel and a gray polyester powder inside and out. It is designed for indoor or outdoor locations. The screw cover box features a drip shield top and smooth seamless sides, front, and back, knockouts are standard in the bottom, no gasket is required, hasp for padlocking and provisions for meter seal are provided. A slip on reversible, removable cover is securely fastened with screws located along the bottom edge and ideal for surface mounting.- Model #RSC060604RC.
- Designed for use as wiring boxes and junction boxes.
- Provide protection in outdoor applications against rain, sleet, and snow, or indoors against dripping water.
- ANSI-61 gray polyester powder inside and out.
- Drip shield top and smooth seamless sides and front.
- Mounting holes provided on back of enclosure.
- Hasp for padlocking or meter seal is provided.
Every item checked for quality
