Showing 127–135 of 260 results
-
SKILSAW TRUEHVL 48-Volt Lithium-Ion 5.0 Ah Battery
$249.98 $137.49TRUEHVL is the only battery technology that cuts it with Worm Drive. TRUEHVL is designed specifically to power Worm Drive and delivers the performance and power you demand. Patented Stay Cool technology wraps each cell with a temperature controlling material that keeps cells cool and provides better performance. Our intelligent power management system monitors and optimizes each cell. An innovative battery design evenly distributes heat to extend run time. Together, these technological advances create a battery that’s powerful enough for our legendary Worm Drive. The next generation of Worm Drive power is here.
- Stay cool battery technology wraps each cell in a temperature controlling material that keeps cells cool and delivers better performance.
- Innovative battery design arranges cells in a unique configuration that evenly distributes heat to extend run time.
- Our intelligent power management system maximizes power and performance by monitoring and optimizing each cell.
- Compatible with all SKILSAW TRUEHVL tools and chargers.
- Battery specifications: 48-Volt, 5.0 Ah, 240 Wh.
- TRUEHVL quick charger sold separately.
Every item checked for quality -
BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Outlet Diameter Compression Outlet 1/4-Turn Angle Valve, #64
$5.45 $3.00BrassCraft 1/2 in. Nominal push connect inlet x 3/8 in. Outlet Diameter push connect outlet 1/4-turn angle valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a 90 turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.
- 1-piece body construction provides strength, durability and long-lasting performance.
- 1/2 in. nominal push connect x 3/8 in. OD push connect.
- Compatible with copper, PEX or CPVC tubing.
- For use in potable water distribution systems, not intended for recirculating water systems that produce continuous use temperatures above 115°F for those applications, use our KT series ball stops.
- Smooth, quarter-turn operation, on/off flow control with a 90 turn of the handle.
- 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
- Easy-to-remove handle protects against accidental operation during rough-ins.
- Installation ready: requires no special tools, soldering OT glue for a watertight seal.
Every item checked for quality -
SunTouch Floor Warming 72 in. x 30 in. 120-Volt Radiant Floor Heating Mat
$189.00 $103.95This 120 volt 6 foot x 30 inch SunTouch floor warming mat adds comfort and a touch of luxury to a home. This ultra-thin, low-profile system installs beneath tile, stone and even vinyl or laminate flooring. It’s ideal for remodeling bathrooms and kitchens and offers an upscale option when designing new construction. It is energy efficient as well as inexpensive to operate. Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels and it is UL listed for safety.
- Energy efficient, inexpensive to operate.
- Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels.
- Single point power connection makes layout and wiring a snap.
- Armored power lead, wire straight to the electrical box, no conduit required.
- Heat-up times are generally 30-45 minutes for framed floors, slabs take longer.
- High-quality heating cable made with oxygen-free copper heating element surrounded by ETFE insulation and a braided metal grounding jacket.
- Power lead is color-coded green (ground), black (power), and white (neutral).
- SunTouch is made in the USA and tested by the Tile Council of America.
- Mats can be connected in parallel for larger floor surfaces.
- Can be combined with a thermostat control (not included).
Every item checked for quality -
Charlotte Pipe 2 in. PVC DWV 22-1/2-Degree Hub x Hub Street Elbow Fitting
$5.31 $2.92PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140°F. PVC is lightweight and easy to install. They require no special tools for cutting, and can be installed with solvent cementing, threading, flanging, and roll-grooved joining.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Apollo 3/4 in. Brass PEX-B Barb x 3/4 in. Male Pipe Thread Adapter (5-Pack)
$16.45 $9.05The ApolloPEX 3/4 in. Brass PEX Barb x 3/4 in. Male Pipe Thread Adapter is simple to install. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX adapters can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Most economical piping system available.
- Meets UPC, IPC and cUPC standard.
- Can secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves.
- NSF listed.
- Barb x MIP connection for PEX plumbing systems.
- Maximum working pressure of 200 psi and maximum temperature of 200 degree F.
Every item checked for quality -
Commercial Electric Ultra Slim 4 in. Color Selectable New Construction & Remodel IC Rated Indoor/Outdoor Integrated LED Recessed Light Kit
$22.47 $12.36The Color Temperature Select Recessed Lighting Kits are the recessed lights of the future. Not only is each fixture designed specifically for small spaces where height clearance is limited such as beams or ductwork, you can change the color temperature with a flick of a button. The integrated color changing switch is located on the cable so you can choose between a 2700, 3000, 3500, 4000 or 5000 Kelvin temperature to best suit your needs. 2700 or 3000 Kelvin is perfect for relaxing, 3500 or 4000 Kelvin is the ideal choice for everyday affairs and 5000 Kelvin is great for task lighting in a basement, hallway or work area. Energy Star certified, and IC rated for direct contact with insulation, these lights won’t overheat, do not require a bulky can and will last for years to come – 50,000 hours or approximately 34 years if used for 4 hours per day to be exact. Wet rated and certified airtight, this 4 in. kit is perfect for your bathroom, drop ceilings, outdoor soffits and all general lighting applications.
- SELECTABLE COLOR TEMPERATURE: with the flick of a button, choose the color temperature that works best for your space – 2700 – 3000 Kelvin is perfect for relaxing, 3500 – 4000 Kelvin is the ideal choice for everyday affairs and 5000 Kelvin is great for task lighting in a basement, hallway or work area.
- EASY INSTALL SLIM LED: an ultra-thin profile, integrated LED and a slim junction box will not interfere with your joists or ductwork. Effortless push and click quick connects allows for worry free, easy installation and are the choice of professional electricians. Actual hole size is 4.25-inches. Trim size: 5-inches.
- LIGHT SPECS: 60W equivalent Integrated LED using only 9W – 2700K/3000K/3500K/4000K or 5000K color temperature choice – 90 CRI for brighter colors – bright 540 lumens – 50,000-hour, 34 year, lifespan – Energy Star Certified.
- WET RATED AND AIRTIGHT: perfect for showers, bathrooms, outdoor soffits and all general lighting applications.
- IC RATED: for direct contact with insulation – no recessed can required. CEC Title 24 Compliant.
- DIMMABLE: fully dimmable from 100% to 10% with an LED compatible dimmer switch to create the perfect atmosphere (dimmer switch sold separately).
- ENERGY STAR CERTIFIED: reduce energy, maintenance and cooling costs with an Energy Star certified integrated LED technology, meeting the highest Energy Star standards, this light is sure to be the highest quality product for years to come with no bulbs required.
Every item checked for quality
