Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
  2. Shop
    3. Page 2

Showing 10–18 of 260 results

Filters

  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (3/8 in. O.D.) w/Safety+Plus2 Thermal Excess Flow Valve (33,400 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. I.D. (3/8 in. O.D.).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • The Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • 1-1/2 in. 90-Degree Electric Metallic Tube (EMT) Elbow

    The corrosion-resistant 1-1/2 in. EMT 90 degree Elbow changes conduit direction while still allowing for easy wire pulling, thanks to its large radius. Usable indoors or outdoors. This elbow meets UL and CSA requirements.

    • Enables a 90 degree change of direction in a run of EMT conduit.
    • Made of galvanized steel for corrosion resistance.
    • UL and CSA Listed.
    • Large radius allows for easy wire pulling.
    Green checkmark of qualityEvery item checked for quality
    $12.27 $6.75

  • 2″ Insulated Ground Bushing

    Bridgeport 386-DC 2″ Die Cast w/Plastic Metaliner Insulated Grounding Bushing for Rigid/IMC Conduit.

    • Material: Ball Burnished Mirror Smooth Die-Cast Zinc.
    • Approval: UL 514B, UL (Canada and US).
    • Used On: IMC/Rigid Conduit.
    • Additional Information: ROHS Compatible; Applicable Standard Federal Specification A-A-50553, NEMA FB-1; Insulator Material Nylon; Insulation Temperature 150 Deg C.
    • Type: Threaded.
    • Trade Size: 2 Inch.
    • Wire Size: 14 AWG Solid to 1/0 AWG Stranded.
    • Lug Type: Tin Electroplated 6061-T6 Aluminum Alloy.
    • Throat Type: Insulated.
    • Diameter: 2-5/8 Inch.
    • Height: 1/16 Inch.
    Green checkmark of qualityEvery item checked for quality
    $4.67 $2.57

  • 14.37D x 18.7W x 5.12H Above Counter Rectangular Bathroom Vanity Vessel Sink

    Flat and smooth surface. Easy for installation and staying clean. Modern, Glaze Glossy, Delicate, and solid ceramic with glaze. Durable & scratch-resistant lifetime use. High Temperature Integral Molding, Seamless, No Leakage. Above the counter installation. Length: 18.70″; Width: 14.37″; Height: 5.12″; Drain Size: 1-3/4″. Vessel sink only (Faucet and drain stopper not included).

    Green checkmark of qualityEvery item checked for quality
    $81.82 $45.00

  • Apollo 1/2 in. x 1/2 in. CPVC CTS Slip Stainless Steel MPT Adapter

    The Apollo 1/2 in. CPVC x Male Threaded Transition Adapter is simple to install and is designed for transitioning from CPVC to alternative piping systems. It is designed for use within hot and cold water pressure piping systems in all commercial and residential applications. The CPVC x Male Threaded Transition Adapter features a female solvent weld socket and a male threaded stainless steel connection. The fitting is used in applications where a change in the piping material is necessary.

    • Compatible with CPVC pipe.
    • Solvent weld slip x stainless steel male pipe thread (MPT) connection.
    • Not compatible with gases or compressed air.
    • Used to transition from CPVC piping system to alternative piping systems.
    • NSF Listed.
    • Meets UPC, IPC and cUPC standard.
    Green checkmark of qualityEvery item checked for quality
    $6.58 $3.62
  • Placeholder

    #10, JAC0053BN, Brushed Nickel Single Lever Pull-Down Kitchen Faucet

    $100.00 $55.00

  • FloorMuffler 100 sq. ft. 4 ft. x 25 ft. x 0.04 in. Premium Underlayment for Vinyl Plank Flooring

    It’s what’s underneath that counts! FloorMuffler Encore is a high-performance acoustical underlayment for most vinyl plank and rigid core floor coverings with or without a pre-attached pad. As a premium grade underlayment, FloorMuffler Encore uses its closed-cell polypropylene foam construction and UltraSeal self-sealing lip and tape system to form a moisture barrier. FloorMuffler Encore is designed for floating floor installations and is the ideal underlayment for both residential and commercial projects.

    • FOR PRE ATTACHED PAD FLOORS: For use with most vinyl plank and rigid core floor coverings with or without pre attached pad.
    • ACOUSTICAL PERFORMANCE: Highest acoustic ratings on the market: HIIC up to 76, IIC up to 69 dB, STC up to 62 dB, Delta IIC up to 22 dB.
    • MOISTURE PROTECTION: All-in-one moisture barrier means no additional films required. UltraSeal lip & tape system joins rolls at the seams to ensure moisture protection.
    • LONG TERM PROTECTION: Superior compression characteristics help to ensure the integrity of your floor’s tongue and groove system. Check out the Third Party Verification Test Report in the Additional Resources section.
    • ECO-FRIENDLY: Surpasses the indoor air quality emissions requirement for California’s Section 01350-the most stringent volatile organic compound (VOC) emissions standard in North America. Mold and Mildew Resistant.
    • FLOORSCORE CERTIFIED.
    • AROUND THE GLOBE: FloorMuffler has become the industry’s most trusted brand of underlayments with millions of square feet installed in residential and commercial applications around the world.
    • INNOVATION is at the core of what we do. FloorMuffler Encore brings improved performance to attached pad flooring systems.
    Green checkmark of qualityEvery item checked for quality
    $79.00 $43.45

  • Residential Duty 3-1/2 x 3-1/2 Hinge – 1/4 in. Radius Corner – Lacquered Oil Rubbed Bronze

    • Manufacturer: SGS/EL & EL Wood Products.
    • Style: Traditional.
    • Type: Butt hinge-1/4 in. radius.
    • Material: Steel.
    • Color/Finish: Bronze/oil rubbed.
    • Size: 3-1/2″ x 3-1/2″.
    • Width: 3-1/2″.
    • Residential Weight hinges warranted for life of the opening.
    • Does Not Include Wood Mounting Hardware.
    Green checkmark of qualityEvery item checked for quality
    $5.87 $3.23

  • SunTouch Floor Warming 4 ft. x 30 in. 120-Volt Radiant Floor Heating Mat (Covers 10 sq. ft.)

    The SunTouch Floor Heating Mat measures 4 ft. x 30 in. and offers an ultra-thin, low-profile system that installs beneath tile, stone and even vinyl or laminate flooring. Its ideal for remodeling bathrooms and kitchens to add radiant floor heating and offers an upscale option when designing new construction floor warming. Dual-wire technology reduces electromagnetic fields (EMF) to ultra-low levels. The mat is an energy-efficient touch of radiant floor warming luxury for your home, is UL listed, and comes with detailed installation instructions.

    • Install the heated floor mat below ceramic or porcelain tile, stone or brick floors or in a self-leveling mortar bed below vinyl floors, floating wood- and laminate floors.
    • For indoor floor-warming use only.
    • Open-weave construction for easy application of thin-set and mortar without compromising the bond of your floor covering to the sub-floor.
    • Dual wire technology keeps EMF to ultra-low levels.
    • UL listed for safety.
    • Energy efficient, inexpensive to operate.
    • Armored power lead wire straight to the electrical box, no conduit required.
    • Single-point power connection to facilitate layout and wiring.
    • Mats can be connected in parallel for larger floor surfaces.
    • Can be combined with a programmable thermostat control (not included).
    Green checkmark of qualityEvery item checked for quality
    $169.51 $93.23
X