Showing 181–189 of 260 results
-
BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve, #73
$5.45 $3.00
BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.
- Compatible with PEX, copper and CPVC.
- Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
- Installation ready: requires no special tools, soldering or glue for a watertight seal.
- 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
- Pre-inserted tube stiffener is “installation ready” for a faster connection.
- Easy-to-remove handle protects against accidental operation during rough-ins.
- Chrome-plated brass.
- Temperature rating: 40° to 160°F.
- Pressure rating: 125 psi maximum.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality -
Halex 1/2 in. Electrical Metallic Tube (EMT) Drive Straps (200-Pack)
$29.64 $16.30When EMT conduit must be installed on wood or masonry, turn to the Halex 1/2 in. EMT Drive Straps (200-Pack). These zinc-plated straps are for indoor and outdoor use. They have a flat design.
- Secure EMT conduit to wood or masonry surfaces.
- Zinc-plated steel resists corrosion.
- UL and CSA safety listings.
- For indoor or outdoor applications.
Every item checked for quality -
WIEGMANN Outdoor Enclosure 6 in. x 6 in. x 4 in. NEMA 3R Screw Cover/Pull Box
$44.27 $24.35WIEGMANN 6 In. x 6 In. x 4 In. rain-proof screw cover box is made of pre-galvanized steel and a gray polyester powder inside and out. It is designed for indoor or outdoor locations. The screw cover box features a drip shield top and smooth seamless sides, front, and back, knockouts are standard in the bottom, no gasket is required, hasp for padlocking and provisions for meter seal are provided. A slip on reversible, removable cover is securely fastened with screws located along the bottom edge and ideal for surface mounting.- Model #RSC060604RC.
- Designed for use as wiring boxes and junction boxes.
- Provide protection in outdoor applications against rain, sleet, and snow, or indoors against dripping water.
- ANSI-61 gray polyester powder inside and out.
- Drip shield top and smooth seamless sides and front.
- Mounting holes provided on back of enclosure.
- Hasp for padlocking or meter seal is provided.
Every item checked for quality -
QEP 4-1/8 in. Wide Economy Knee Kicker
$45.47 $25.01The Economy Knee Kicker secures carpet during installation and makes it easy to fix loose carpet. This positioning tool is designed for use with low-profile carpet, and features teeth angled forward to help grip and hold the carpet. The teeth are not straight, because this kicker is not intended to pull or stretch carpet to remove wrinkles. The thick foam-filled bumper pad and nonslip, comfort foam grip handle make this knee kicker comfortable to use. It is ideal for small installations, to fix loose carpet, and to use in hallways and closets. Lightweight aluminum and steel construction.
- For small installations and fixing loose carpet.
- Tighten loose carpet like a professional.
- Lightweight aluminum and steel construction.
- Great for hallways and closets.
- Features a soft, foam comfort grip handle.
- Triple nap grip design to hold carpet firmly.
Every item checked for quality -
BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Outlet Diameter Compression Outlet 1/4-Turn Angle Valve, #64
$5.45 $3.00BrassCraft 1/2 in. Nominal push connect inlet x 3/8 in. Outlet Diameter push connect outlet 1/4-turn angle valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a 90 turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.
- 1-piece body construction provides strength, durability and long-lasting performance.
- 1/2 in. nominal push connect x 3/8 in. OD push connect.
- Compatible with copper, PEX or CPVC tubing.
- For use in potable water distribution systems, not intended for recirculating water systems that produce continuous use temperatures above 115°F for those applications, use our KT series ball stops.
- Smooth, quarter-turn operation, on/off flow control with a 90 turn of the handle.
- 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
- Easy-to-remove handle protects against accidental operation during rough-ins.
- Installation ready: requires no special tools, soldering OT glue for a watertight seal.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (71,100 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCrafts stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality -
EcoSmart 90-Watt Equivalent BR40 Dimmable ENERGY STAR LED Light Bulb Soft White (2-Pack)
$14.98 $8.24Upgrade your current lighting with the EcoSmart 90-Watt equivalent BR40 Dimmable Flood LED Light Bulbs. Use these bulbs to replace your traditional incandescent bulbs-with all the benefits of LED technology. Save on your energy bill every month. Rated to last for 15,000-hours and estimated to cost only $1.81 per-year to operate, these energy efficient BR40 LED light bulbs will reduce household energy costs by using 85% less energy than traditional incandescent bulbs. Using only 15-Watt to produce 1295 Lumens of Soft White (2700K) light, these flood lights produce brightness equivalent to a 90-Watt incandescent light bulb. The soft white color temperature is essential in creating a relaxing, balanced feel throughout your home. It is recommended for living rooms, kitchens, bathrooms and bedrooms. Customize your lighting style with this dimmable bulb by adjusting your light from soft white to a relaxing, low light. Suitable for use in enclosed fixtures and ideal replacement bulbs for indoor recessed and track lighting. Start saving today with EcoSmart.
- Brightness: 1295 Lumens.
- Estimated yearly energy cost: $1.81 (based on 3-hours/day, 11/kWh, costs depend on rates and use).
- Life: 13.7-year (based on 3-hours/day).
- Light appearance: 2700K (soft white).
- Energy used: 15-Watt (Equivalent to a 90-Watt standard incandescent bulb).
- Energy used: 15-Watt (equivalent to a 90-Watt standard incandescent light bulb).
- Fully dimmable with a shadow-free experience.
- Ideal for use in totally enclosed fixture.
- Damp locations rated.
- LED light bulb does not contain mercury.
- Energy efficient.
Every item checked for quality -
2 in. PVC Fitting – Meter Offset (Standard Fitting)
$5.35 $2.94The 2 in. Non-Metallic Meter Offset is a high-quality fitting designed for indoor and outdoor use. Non-metallic PVC resists rust, corrosion, impact and the damaging effects of sunlight. The meter offset features external ridges for containment in concrete and can be used with sch. 40 and sch. 80 conduit.
- Brings electrical service into a meter box.
- Non-metallic PVC is heat, fire and corrosion resistant.
- Compatible with sch. 40 or sch. 80 conduit.
- Ridges on the outside for concrete encasement.
- UL Listed for safety and peace of mind.
- Socket on 1 end with threads on offset for easy installation.
Every item checked for quality
