Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
  2. Shop
    3. Page 22

Showing 190–198 of 260 results

Filters

  • ECHO YOUCAN Fuel System Kit 225 Series Models

    Keep your ECHO equipment running like new by extending engine performance and longevity with the 90127Y Fuel System Kit. Fuel system components are vital to engine health. Regular fuel system maintenance will prevent dirt and debris from entering your carburetor. Blocked or partially clogged fuel filters will cause hard starting and low power output. Being proactive with routine maintenance can save you time, money, and downtime. The Fuel System Kit contains genuine ECHO replacement parts.

    • Includes: fuel filter, fuel lines, grommet, fuel cap, gasket, fuel tank vent and purge bulb.
    • For use on: ECHO trimmers, brushcutters, edgers, and power attachment series (PAS).
    • Fits models: GT-225/i/L/SF, SRM-225/i/SB/U, PE-225, PAS-225/SB.
    • Fuel components should be inspected every 3 months or 90 hours, or per your operators manual, and replaced on a yearly basis.
    • Product is regulated for use with off-road engines and equipment under EPA 40 CFR Part 1060 and must be used on engines/equipment built after 1/1/2012.
    Green checkmark of qualityEvery item checked for quality
    $14.98 $8.24

  • Apollo 3/4 In. X 3/4 In. Pvc Schedule 40 Slip X Slip Ball Valve Pro Pack (12-Pack)

    PVC Sch. 40 Ball Valves are compact and lightweight. This Slip x Slip valve is designed for a variety of applications including pressure distribution of cold water in irrigation, pool, spa, agricultural, commercial and light industrial applications and comes in a plastic jar of 12 valves which is convenient, resealable, and reusable. The ball valves are NSF approved and have EPDM seats and O-rings integrated into the durable PVC body.

    • PVC schedule 40 construction for durability.
    • Full port design allows for maximum efficiency and minimal turbulence or pressure reduction.
    • Quarter-turn flow control for easy on and off.
    • NSF / ANSI standard 372 certified.
    • Slip connections conform to ASTM D2467.
    • Working temperature range: 41°F to 122°F (5°C to 55°C).
    • Maximum pressure rating 150 psi at 73°F (22°C).
    • Requires solvent cement for installation (not included).
    • Please note – as temperature increases, working pressure decreases, the optimal working pressure for PVC valves is 150 psi at 73°F (22°C) if the temperature increases above 73°F (22°C), use the PVC. correction factor to determine working pressure, multiply the maximum working pressure by the correction factor, please see correction factor grid on the attached specification sheet.
    Green checkmark of qualityEvery item checked for quality
    $18.18 $10.00

  • OPEN BOX – Intermatic 20 Amp 24-Hour Indoor In-Wall Heavy-Duty Mechanical Timer, White

    The IW700K is a mechanical in-wall timer that replaces a standard wall switch to provide automatic control of outdoor or indoor lighting, fans, pumps, office equipment and other types of loads. It features 36 ON/OFF events per 24-hour period and captive trippers that will never fall out. For use with single pole applications. ON/AUTO/OFF override provides continuous ON or OFF positions. Wall plate included. Reliable synchronous timer motor. CSA certified. UL listed. #14 AWG color coded lead wires. Hot -Black; Switched – Red, Neutral – White. Resistive: 20 Amp, 120 VAC. Motor: 1 HP, 120 VAC.

    • Open Box – Missing Mounting Screws.
    • Original UPC: 078275143456.
    • 3-position ON/OFF/AUTO override provides continuous ON or OFF operation.
    • Reliable synchronous timer motor.
    • Multiple wall plates available.
    • Easy wiring and installation.
    • Heavy-Duty 20 A rating.
    • Requires neutral connection.
    • Perfect for use with entryway lighting, deck light controls, landscape light controls, attic fans, pumps, hallway lighting, small store lighting and more.
    Green checkmark of qualityEvery item checked for quality
    $22.27 $12.25

  • Defiant Wired Doorbell Tri-Volt Transformer

    This Defiant Branded Tri-Volt Wired Doorbell Transformer is ideal for new construction or replacement. It features a Low-Voltage wired design with 3 options for electrical output: 8-Volt AC/10-Volt A, 16-Volt AC/10-Volt A or 24-Volt AC/20 VA. The transformer secures to knockout hole in junction box with included lock nut clamp.

    • Tri-volt/clamp-on type.
    • Input: 120-Volt AC.
    • Output: 8-vac/10-va, 16-vac/10-va or 24-vac/20-va.
    • Works with any wired door chime.
    Green checkmark of qualityEvery item checked for quality
    $29.98 $16.49

  • WIEGMANN Outdoor Enclosure 6 in. x 6 in. x 4 in. NEMA 3R Screw Cover/Pull Box

    WIEGMANN 6 In. x 6 In. x 4 In. rain-proof screw cover box is made of pre-galvanized steel and a gray polyester powder inside and out. It is designed for indoor or outdoor locations. The screw cover box features a drip shield top and smooth seamless sides, front, and back, knockouts are standard in the bottom, no gasket is required, hasp for padlocking and provisions for meter seal are provided. A slip on reversible, removable cover is securely fastened with screws located along the bottom edge and ideal for surface mounting.
    • Model #RSC060604RC.
    • Designed for use as wiring boxes and junction boxes.
    • Provide protection in outdoor applications against rain, sleet, and snow, or indoors against dripping water.
    • ANSI-61 gray polyester powder inside and out.
    • Drip shield top and smooth seamless sides and front.
    • Mounting holes provided on back of enclosure.
    • Hasp for padlocking or meter seal is provided.
    Green checkmark of qualityEvery item checked for quality
    $44.27 $24.35

  • HALO 4 in. 2700K-5000K Selectable CCT Surface Integrated LED Downlight Recessed Light with White Round Trim

    The Halo Surface LED Downlight (SLD4) is an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. Equipped with 5 color temperature settings ranging from soft (2700K) to daylight (5000K), this SLD4 (4 in.) is designed for installation in many standard and fire-rated 3-1/2 in. and 4 in. round or octagon junction boxes. Supply wire adapater with LED quick wiring connector included. Suitable for residential or commercial installations. Ideal for closets, storage areas, attics and basements.

    • Fixture is built to last with maintenance-free energy efficient LEDs with 50,000-hours of life.
    • Equipped with 5 color temperature settings ranging from warm (2700K) to daylight (5000K).
    • 90 CRI title 24 Compliant technology provides near sunlight quality light for true color rendering and consistency inside your home.
    • Flexible mounting with included junction box bracket.
    • ENERGY STAR qualified for energy conservation and savings up to $400 savings over the life of the ceiling light fixture.
    • Can be installed in 3-1/2 in. x 2 in. and 4 in. x 1-1/2 in. junction boxes for new construction, remodel and retrofit applications.
    • Compatible with most 4 in. housings.
    • Designed for continuous dimming capability to nominally 5% with many 120-Volt Leading Edge (LE) and Trailing Edge (TE) phase control dimmers.
    • Wet location, damp location, air-tite, insulation contact rated and can be used with fire-rated ceiling system.
    • SLD retrofit kit sold separately.
    Green checkmark of qualityEvery item checked for quality
    $24.96 $13.73

  • Sharkbite Prolock 1 In. Push-To-connect Plastic 90-Degree Elbow Fitting Pro Pack (3-Pack)

    SharkBite ProLock fittings are a versatile and innovative full-flow plumbing system utilizing push lock fitting technology and engineered specifically for use with SharkBite PE-RT and PEX pipe. The SharkBite 1 in. Push-to-Connect 90° Elbow intuitive design makes for one of the simplest and most dependable fittings on the market. No tools are required to make a connection. They use a collet with stainless steel teeth that grips the pipe when fully inserted, and an EPDM O-Ring to provide a permanent, leak-proof seal. The Twist-to-lock technology ensures maximum security. When twisted into place with indicator arrows aligned, the locking cap locks the pipe in place and creates an audible click. Removing a SharkBite fitting is just as easy with no tools needed; simply twist the cap turn counterclockwise to unlock then depress collet against the fitting to remove the pipe. ProLock fittings are suitable for hot and cold potable water and hydronic heating applications. They have been specifically designed for the Professional Plumber. Code approved for behind-the-wall installations.

    Green checkmark of qualityEvery item checked for quality
    $28.96 $15.93

  • Master Flow 12 in. x 12 in. to 8 in. Ceiling Register Box

    The Master Flow 12 in. x 12 in. x 8 in. Ceiling Register Box is made of 30-Gauge galvanized steel. It creates a transition from round pipe or insulated flexible duct to an air register or grille. The ceiling register box can be installed with sheet metal screws. It has a maximum temperature rating of…

    Green checkmark of qualityEvery item checked for quality
    $23.64 $13.00

  • Husky 50 ft. 16/2 Indoor/Outdoor Extension Cord, Green

    This Husky 50 ft. 16/2 2-pronged Extension Cord is versatile for indoor/outdoor job sites and household use. Rated for 13 Amp and 125-Volt. Reinforced blades and molded plugs prevent accidental bending and breaking. cULus Listed. Medium-duty, Durable and Flexible.

    • Durable cord is designed to withstand temperatures from minus 40°F up to 167°F.
    • 50 ft. 2-prong extension cord may be used with power tools and appliances for light duty applications inside and outside of your homes.
    • For indoor/outdoor use.
    • 13 Amp, 125-Volt, 1625 maximum watt capacity.
    • Each plug has 2 prongs.
    Green checkmark of qualityEvery item checked for quality
    $17.96 $9.88
X