Showing 190–198 of 260 results
-
Intex 28520E Tablet Mobile Phone Spa Tray Accessory with LED Light Strip in White
$33.73 $18.55Enjoy a soak in the spa while watching a movie on your smartphone or tablet safely placed on the Intext Spa Tray Accessory. This tray easily attaches to the wall of your Intex Pure Spa (sold separately). The interior of the tray is lined with a white LED light strip, allowing you to clearly see the tray during an evening soak. There are 2 cupholders for your drinks, and the tray can also be used to serve some snacks. Place your smartphone or tablet on the tray to keep it nearby. The tray allows for hands-free operation, so you can easily play music or start a movie via voice command without worrying about dropping your phone or device into the water. Attach the Intex Spa Tray to your spa to protect your phone or enjoy some snacks and drinks.
- Keep drinks, tablets, and smartphones safe by the side of your Intex Pure Spa with the Intex Spa Tray.
- White LED light strip along the edge of the tray provides an ambient light.
- Watch movies on your tablet without dropping your device into the water.
- Serve snacks or drinks on the spa tray.
- Spa tray attaches to the spa wall for easy installation.
Every item checked for quality -
Wilkins 3/4 in. Lead Free Brass NPT Pressure Relief Valve
$37.40 $20.57The P1000AXL-150C Pressure Relief Valve is set at 150 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.
- Eliminates risk of over-pressure of storage tanks.
- Epoxy-coating adds extra protection.
- Pressure relief valve set at 150 psi.
- CSA Compliance to ANSI Z21.22/CSA 4.4.
- Certified to ASME Section IV by National Board.
- Pressure relief valve settings of 30, 75, 125, and 150 psi offer versatility.
Every item checked for quality -
Home Decorators Collection Slim Line 1-Piece 8 in. D x 18 in. L x 1-1/4 in. MDF White Floating Shelf
$18.98 $10.44The White Slim Shelf from Home Decorators Collection has a slim, clean line profile and is perfect for displaying photographs, books and decorative objects. Ideal for any room in your home, this shelf has a sleek white finish that will give your walls visual interest, while providing a sturdy display and storage space that is attractive and easy to install. Mount in multiples for a complete shelving system you will enjoy for many years to come.
- Create any arrangement from 1-shelf to a complete shelving system.
- Functional and attractive.
- Slim profile for a clean, unobtrusive look.
- Easy to install with hardware included.
- Great way to display precious items.
Every item checked for quality -
SharkBite Push-to-Connect Faucet Installation Kit
$36.36 $20.00The SharkBite Faucet Installation Kit has everything you need to install your new faucet. The kit includes 2 SharkBite 1/2 in. x 1/4 in. (3/8 in. O.D.) Push-to-Connect Angle Stop Valves, two 5 ft. coils of 1/4 in. PEX Pipe, two 1/4 in. (3/8 in. O.D.) SharkBite x 1/2 in. Swivel Faucet Connectors, and a 1/2 in. Chrome Trim Cover reversed functions as a disconnect and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up under the sink providing a clean, tangle free look. Once the stop valves are installed, thread the 1/2 in. faucet connectors onto the faucet connections and then measure and cut the PEX and push into the outlet on the stop valve and the faucet connector and the installation is complete.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Orbit 3/4 in. Automatic Converter Valve
$24.96 $13.73The automatic converter valve allows you to transform an existing manual valve into a fully automatic valve. The converter valve fits the threads in most makes of manual valves, including manual anti-siphon valves. Brass threads ensure reliable installation and high durability. The valve features a 24 VAC solenoid, manual actuation lever, bleed screw, and flow control. In cases where there is no existing sprinkler wire running to the valve, the Orbit battery-powered controller provides a simple way to power up to four valves in a single location. The automatic converter valve is compatible with all major brands of 24 VAC irrigation controllers. We recommend B-hyve controllers for optimum water conservation and PVC-Lock fittings for fast, glue-free installation. For outdoor irrigation use with cold water only.
- Compatible with controllers from Orbit, Hydro-Rain, and other major brands.
- Brass threads with valve bodies available in both PVC and brass body versions.
- Valve features 24 VAC solenoid, manual actuation lever, and flow control.
- Heavy-duty construction with UV resistance for durability and longevity.
- For converting a manual irrigation valve into an automatic irrigation valve.
- Control with a B-hyve smart controller for optimum water conservation.
- Includes a ring adapter.
- For outdoor use with cold water only.
- For irrigation applications only.
- Flow-control adjustment.
Every item checked for quality -
2 in. PVC Fitting – Meter Offset (Standard Fitting)
$5.35 $2.94The 2 in. Non-Metallic Meter Offset is a high-quality fitting designed for indoor and outdoor use. Non-metallic PVC resists rust, corrosion, impact and the damaging effects of sunlight. The meter offset features external ridges for containment in concrete and can be used with sch. 40 and sch. 80 conduit.
- Brings electrical service into a meter box.
- Non-metallic PVC is heat, fire and corrosion resistant.
- Compatible with sch. 40 or sch. 80 conduit.
- Ridges on the outside for concrete encasement.
- UL Listed for safety and peace of mind.
- Socket on 1 end with threads on offset for easy installation.
Every item checked for quality -
RUGPADUSA Essentials 9 ft. x 12 ft. Hard Surface 100% Felt 1/4 in. Thickness Rug Pad
$87.51 $48.13If you’re looking for some cushion under your rugs that won’t break the bank, RUGPADUSA Essentials is for you. These felt rug pads are 1/4 in. thick 100% recycled fiber. They add comfort underfoot and help with noise reduction on rugs that don’t require a non-slip pad. Our pads are manufactured and made to withstand heavy traffic while protecting your rugs and your floors. We stock Essentials in the most common sizes for rugs, and they can easily be modified with a pair of household scissors.
- 100% felt padding buffers foot traffic, traps dirt, and prolongs the life of rugs and floor surfaces.
- Needle-punched felt.
- Dense, thick felt provides cushion underfoot.
- Will not strip, discolor, or damage any floor surfaces.
- Made with 100% pre-consumer, recycled fibers for long lasting comfort and durability.
- Low VOC emissions keep your family safe from harmful irritants.
Every item checked for quality -
BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve, #73
$5.45 $3.00
BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.
- Compatible with PEX, copper and CPVC.
- Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
- Installation ready: requires no special tools, soldering or glue for a watertight seal.
- 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
- Pre-inserted tube stiffener is “installation ready” for a faster connection.
- Easy-to-remove handle protects against accidental operation during rough-ins.
- Chrome-plated brass.
- Temperature rating: 40° to 160°F.
- Pressure rating: 125 psi maximum.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality
