Showing 226–234 of 260 results
-
T103 Mechanical Time Switch 40A 120V
$60.38 $33.21Provides direct 24 hour control of most loads, electrical loads up to 40 amps. 1 to 12 on/off operations each day with minimum on/off times of 1 hour. Manual override without changing settings. Comes with one on and one off tripper. Features Switch rating – Each pole; 40 amp resistive, 120-480 vac; 40 amp tungsten,…
Every item checked for quality -
Husky 1-1/2 in. Quick-Release Telescoping Basin Wrench
$19.98 $10.99Husky s Quick Release Telescoping Plumbing Basin Wrench is ideal for tightening and removing faucet and fill valve nuts. It features a versatile multi-position telescoping range of 12-1/2 in. up to 19 in. for hard to reach valves. It also features an extra-large spring-loaded jaw with a capacity of 3/8 in. up to 1-1/2 in.…
Every item checked for quality -
BrassCraft 1/2 in. Nominal Push Connect x 1/2 in. FIP x 20 in. SpeediOne Braided Faucet Connector and 1/4-Turn Straight Valve
$3.64 $2.00Original Retail Price: $17.75.
BrassCraft’s push connect one-piece water supply combines their trusted brass water valve with their flexible braided polymer connector for one quick easy-to-install solution. BrassCraft’s one-piece connection features push connect technology on the valve inlet and a hand-tighten wing nut on the outlet to provide a significant savings in installation time and cost. Push connect valve inlet requires no special tools to install and comes equipped with a pre-inserted tube stiffener to make the product ideal for copper, PEX and CPVC piping systems. The braided polymer fibers of the connector are designed to bend freely without kinking or crimping in tight quarters and resist corrosion caused by chemicals found in common household, tile and glass cleaners. In addition, its reinforced inner hose resists corrosion under harsh water conditions.
- 1-piece unit combines valve and supply line.
- Saves time with one less connection.
- No special installation tools required.
- Installation ready with pre-inserted tube stiffener.
- Fast, reliable and secure.
- Compatible with copper, PEX and CPVC.
- Remove with combination removal tool or 5/8 in. open end wrench.
- Connector bends freely without kinking or crimping in tight quarters.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality -
Delta Universal Seats and Springs Repair Kit
$5.98 $3.29Repair leaks in your bathroom or kitchen faucet with the Delta Universal Seats and Springs Repair Kit. The kit is compatible with Delta faucets that have stainless-steel ball valves (faucets and ball valves not included).
- Use in Delta faucets with stainless-steel ball valves (faucets and ball valves not included).
- Repairs leaks in kitchen faucets.
- Can be used to repair leaks in bath faucets.
- Includes 1 set of seats and springs.
- Genuine Delta repair kit.
Every item checked for quality -
Apollo 1 in. PEX-A Expansion Sleeve/Ring (25-Pack)
$16.38 $9.01The Apollo ExpansionPEX 1 in. PEX-A Expansion Sleeve (25-Pack) is simple to install. Apollo ExpansionPEX are produced using PEX-A material. Apollo ExpansionPEX are required to create a secure Apollo ExpansionPEX connection. Apollo ExpansionPEX Expansion Sleeves are engineered with a bevel along the leading edge to ease pipe insertion and an integrated stop to ensure proper placement of the sleeve. The Apollo ExpansionPEX system is a comprehensive cold expansion piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Designed for use with Apollo ExpansionPEX fittings and pipe and is compatible with all expansion type (ASTM F1960) systems.
- Designed for use with 1 in. PEX-A pipe and 1 in. PEX-A barb fittings.
- Pro pack includes 25 sleeves.
- Requires expansion tool (sold separately) for use.
- For use exclusively with PEX-A (ASTM F1960) pipe and systems.
- Meets or exceeds ASTM F1960 and ASTM F877 standards.
- Meets UPC, IPC and cUPC standard.
- Rated to 200F and 200 psi.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector (1/2 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (85,000 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality -
StatGuardPlus Universal Thermostat Guard Clear with Changeable Code Combination Lock
$19.98 $10.99The StatGuardPlus thermostat cover protects your thermostat and prohibits unwanted tampering while still looking very stylish on your wall. It is fitted with a 3-digit combination lock and the combination code is changeable. It fits most thermostats and is made of high quality poly-carbonate clear plastic.
- Combination lock with changeable code.
- Fits over existing thermostat.
- Stylish high quality clear polycarbonate plastic.
- Hinged for easy access while open.
- Slotted on all sides for easy air flow.
- Fits thermostats up to 7 in. W x 4-7/8 in. H x 2-1/4 in. D.
- Comes with drywall anchors and screws.
Every item checked for quality -
Commercial Electric Flat Panel TV Cable Organizer Kit
$74.98 $41.24The Commercial Electric Flat Panel TV Cable Organizer Kit is used to install power and hide unwanted audio/video (A/V) cables in the wall behind your HDTV, amplifier and other A/V devices. This power kit allows you to pass low voltage cables and power through the wall. Create a professional, clean look for your home theater.
- Designed for use with low voltage cables behind flat screen TV’s, amplifiers or other audio and video devices.
- Conceals multiple low voltage cables behind your TV.
- Metal mounting wings are attached to the top and bottom plates and fasten tightly against the back of the drywall when installed.
- Extension cord features a 360° rotating flat head, allowing home theater furniture to placed flush against the wall.
Every item checked for quality
