Showing 226–234 of 260 results
-
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (3/8 in. O.D.) w/Safety+Plus2 Thermal Excess Flow Valve (33,400 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- The Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Hampton Bay 22.00 in. Black Adjustable Arm Desk Lamp with Metal Shade
$27.96 $15.38Swing Arm Desk Lamp will beautifully illuminate any home office desk or nightstand while its black finish will complement any decor that you currently have for endless styling options. Adjustable Goose Neck Architect Study Table Lamp, ideal for Eye-Caring Reading Lamp for Home, Office. Clean, simple lines this classic lamp will beautifully illuminate any desk or nightstand.
- Metal shade.
- Black finish.
- Adjustable goose neck.
- Reading lamp for home, office, multi-joint.
- Classic design.
- Clean, simple lines this classic lamp will beautifully illuminate any desk or nightstand.
- Bulb type: E26, 1x40W type A (not included).
Every item checked for quality -
Lithonia Lighting Contractor Select LQM Series 120/277-Volt Integrated LED White and Red Exit Sign W/Back Up Battery
$79.96 $43.98The Lithonia Lighting Quantum Thermoplastic LED Emergency Exit Sign features an engineering-grade thermoplastic housing that is impact resistant, scratch resistant and corrosion proof. This exit sign uses LED light bulbs and has a nickel-cadmium battery. Innovative snap-together design allows installation in less than 3-minutes.
- 180 Lumens.
- White sign with red lettering.
- Thermoplastic housing.
- Meets UL 924 requirements.
- Uses two 1-Watt LED light strips (included).
- Nickel-cadmium backup battery.
Every item checked for quality -
Dyna-Glo Pro 4,800-Watt 240-Volt Electric Garage Heater
$94.96 $52.23The Dyna-Glo Professional 4,800-Watt Electric Garage Heater is the ideal heating solution for your garage, warehouse or workshop. The Dyna-Glo Professional Electric Garage Heater features 2-heat settings, convenient space-saving ceiling-mount and adjustable thermostat. The EG4800DGP provides 16,380 BTUs while efficiently heating areas up 400 sq. ft. To ensure safety this heater was designed with overheat protection and an industrial grade steel grill.
- 2-heat settings.
- BTUs: 12,285 low, 16,380 high.
- Fully enclosed motor.
- Space saving ceiling mounted design.
- Fully assembled.
- NEMA plug included.
Every item checked for quality -
1/2 in. PVC Male Adapter
$0.55 $0.30
PVC non-metallic fittings can be used with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC). Designed for use above ground and underground as described in the NEC. Fittings insure raceway integrity. Unlike metallic systems, non-metallic fittings are lighter, can be installed in less time and are easily fabricated on the job. Fittings are nonconductive assuring a safe system. Resistant to sunlight and listed for exposed or outdoor usage, Non-metallic PVC fittings are durable and will not rust or corrode.
- Can be used to join RIGID non-metallic conduit (RNC).
- Compatible with Sch. 40 and Sch. 80 RIGID non-metallic conduit (RNC).
- For use in aboveground and underground applications as well as exposed outdoor usage.
- Durable PVC construction means no rusting or corroding.
- Weighing less than metallic systems means more efficient and quicker installation time.
- UL listed.
Every item checked for quality -
Progress Lighting Emblem Collection 5-1/2 in. Slim-Line White Low Profile Integrated LED Surface Flush Mount
$27.27 $15.00
Original Retail Price: $33.00.
The P810016 Edgelit Flush Mount delivers a solution for both residential and commercial markets. The Edgelit technology provides a bright and evenly illuminated surface in a very slim profile. The integrated LED power supply does not protrude into the junction box, allowing for compatibility to 4 in. octagonal, 4 in. round shallow and 4 in. round PVC junction boxes. This surface mounted luminaire measures 11 in. Dia with an overall height of 1 in. In addition, the P810016 is wet location rated, Title 24 JA8 2016 listed, ENERGY STAR listed and is a cost effective solution for fire rated applications (when installed onto a fire rated junction box). The P810016 luminaire combines modern aesthetic, new technology, performance, cost and safety benefits.
- Simple installation to steel mounting plate.
- Light weight polycarbonate luminaire construction.
- Polycarbonate diffuser controls glare and provides an evenly illuminated surface.
- Integrated DC LED power supply capable of flicker-free dimming to 10% brightness with many triac/forward phase dimmers (See dimming notes).
- Can be installed to 4 in. octagonal j-box, 4 x 1/2 in. round shallow j-box and 4 in. round PVC j-box.
- Suitable for use in IC or non-IC applications.
- Meets California title 24 JA8-2016 and is ENERGY STAR listed.
Every item checked for quality -
Steel City 4 in. New Work Metal Round Electrical Outlet Box (Case of 30)
$91.35 $50.24The 6 cu. in. Round Pancake Ceiling Box offers a 35 lbs. maximum rating for mounting ceiling fans. This ceiling box features three 1/2 in. knockouts and compatibility with armored metal-clad cables. Three 1/2 in. knockouts for conduit connections.
- Model # 56111-30R.
- Drawn pre-galvanized steel construction.
- For use with armored metal-clad cable.
- 35 lbs. maximum rating for ceiling fan use.
- UL Listed.
- Meets NEC 370-17.
Every item checked for quality
