Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
  2. Shop
    3. Page 26

Showing 226–234 of 260 results

Filters

  • Halex 1/2 in. Electrical Metallic Tube (EMT) Combination Coupling (25-Pack)

    The UL and cULus safety listed. 1/2 in. Combination Coupling is a standard fitting that is intended for indoor use. The combination coupling is made of zinc, comes with 3 screws and is compatible with EMT conduit. 3 screws included.

    • For indoor use.
    • Made of zinc.
    • Compatible with EMT conduit.
    • Meets UL and cULus requirements.
    Green checkmark of qualityEvery item checked for quality
    $24.87 $13.68

  • Hampton Bay Kenmont 4 ft. 4-Light Brushed Nickel Integrated LED Wave Fixed Track Lighting Kit

    This 4-light fixed track offers a modern style in a brushed nickel finish. The unique design of the movable head gives an immaculate LED light output. The stylish design will add a sophisticated look to any home.

    • Brushed nickel finish for corrosion resistance.
    • Integrated 3000K warm white LED, no bulbs to replace.
    • Adjustable lamp heads to direct light.
    • Only uses 12-Watt of power.
    • Light output of 1600 Lumens.
    • Dimmable.
    • 120-Volt.
    Green checkmark of qualityEvery item checked for quality
    $159.00 $87.45

  • Honeywell Home 1-Week Programmable Thermostat with Digital Display

    The Honeywell Home 1-Week Programmable Thermostat has a simple interface and offers one basic program for the entire week with 4 program periods. It automatically adjusts the heating or cooling of your home so you are comfortable when you wake up, come home or at any other time you prefer. Simple step-by-step instructions included with the thermostat make DIY installation easy.

    • 1 basic program for the entire week.
    • Easy to use, basic operation makes programming easy.
    • Precise +/- 1 Degrees F temperature control.
    • Easy to install.
    Green checkmark of qualityEvery item checked for quality
    $29.98 $16.49

  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (3/8 in. O.D.) w/Safety+Plus2 Thermal Excess Flow Valve (33,400 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. I.D. (3/8 in. O.D.).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • The Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. I.D. (3/8 in. O.D.).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (71,100 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCrafts stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • SunTouch Floor Warming 4 ft. x 30 in. 120-Volt Radiant Floor Heating Mat (Covers 10 sq. ft.)

    The SunTouch Floor Heating Mat measures 4 ft. x 30 in. and offers an ultra-thin, low-profile system that installs beneath tile, stone and even vinyl or laminate flooring. Its ideal for remodeling bathrooms and kitchens to add radiant floor heating and offers an upscale option when designing new construction floor warming. Dual-wire technology reduces electromagnetic fields (EMF) to ultra-low levels. The mat is an energy-efficient touch of radiant floor warming luxury for your home, is UL listed, and comes with detailed installation instructions.

    • Install the heated floor mat below ceramic or porcelain tile, stone or brick floors or in a self-leveling mortar bed below vinyl floors, floating wood- and laminate floors.
    • For indoor floor-warming use only.
    • Open-weave construction for easy application of thin-set and mortar without compromising the bond of your floor covering to the sub-floor.
    • Dual wire technology keeps EMF to ultra-low levels.
    • UL listed for safety.
    • Energy efficient, inexpensive to operate.
    • Armored power lead wire straight to the electrical box, no conduit required.
    • Single-point power connection to facilitate layout and wiring.
    • Mats can be connected in parallel for larger floor surfaces.
    • Can be combined with a programmable thermostat control (not included).
    Green checkmark of qualityEvery item checked for quality
    $169.51 $93.23

  • HALO 8 in. Selectable CCT and Lumens New Construction Canless Recessed Integrated LED Kit

    The HLB8 is a 8 in. ultra-thin LED lens downlight with remote driver/junction box suitable for new construction and remodel applications. Field selectable color temperature and high color rendering provide excellent color performance. Simplified installation in drywall or suspended ceilings eliminates recessed cans saving time and money. Installs from below the ceiling in as little as 3-1/2 in. plenum height, can be used in direct contact with insulation and is airtight. Use for general area lighting in low to medium height ceilings where energy savings, long life and economy are required.

    • Suitable for IC and non-IC applications.
    • 120-Volt to 277-Volt with 0-Volt to 10-Volt dimming.
    • 90 CRI (min), R9 50 and color accuracy within 4 SDCM.
    • Dimmable down to 5%.
    • Wet location listed for showers and protected ceilings.
    • ENERGY STAR.
    Green checkmark of qualityEvery item checked for quality
    $61.47 $33.81

  • ClosetMaid Impressions 28.7 in. W X 28.7 in. D X 41.1 in. H Chocolate Wood Corner Unit, Brown

    This ClosetMaid Impressions Corner Unit is ideal to make the most of corner space in your closet. 3 fixed shelves provide ample room for shoes, boxes and folded clothes. Featuring a rich embossed chocolate finish, the unit includes decorative trim and is designed to nestle between 2 closet towers.

    Green checkmark of qualityEvery item checked for quality
    $99.16 $54.54
X