Showing 19–27 of 260 results
-
KODO 120-Watt Equivalent PAR38 LED Motion Sensor Flood Light Bulb Bright White (2-Pack)
$19.87 $10.93The KODO LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 35 ft. range and keeps lights on for 5 minutes after the last detected movement. The sensor detection angle is 100°. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.
- Radar motion sensor up to 35 ft. turns on lights for 5-minutes.
- 100° detection angle.
- Daylight sensor keeps daytime motion from triggering the lights.
- Easily deactivate sensors to allow for constant 24/7 bulb operation.
- Switch lights ON for normal motion sensor mode.
- Switch OFF, then back ON (within 3-seconds) for always-on, 24/7 operation.
- Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
- 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
- 1200 Lumens each bulb.
- Not for use with existing motion sensor fixtures.
- Light appearance: 3,000K (bright white).
Every item checked for quality -
BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve, #73
$5.45 $3.00
BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.
- Compatible with PEX, copper and CPVC.
- Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
- Installation ready: requires no special tools, soldering or glue for a watertight seal.
- 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
- Pre-inserted tube stiffener is “installation ready” for a faster connection.
- Easy-to-remove handle protects against accidental operation during rough-ins.
- Chrome-plated brass.
- Temperature rating: 40° to 160°F.
- Pressure rating: 125 psi maximum.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality -
-
Potrisers Invisible Pot Feet for Containers & Statuary
$3.98 $2.19POTRISERS, made from 100-percent recycled material, were designed to be an eco-friendly, indestructible and low profile alternative to decorative pot feet, trays and trivets. While remaining hidden, POTRISERS can be fitted to heavy, pre-planted containers. Rubberized material grips surfaces while providing cushioning on hard or uneven surfaces such as wood, concrete, aggregate, compacted materials or stone. POTRISERS come in both retail and bulk packaging. Designed to protect and hide drip lines, POTRISERS allow for easy cleaning and provide crucial drainage needed for healthy plants. By floating containers off the ground, pots are less likely to freeze and crack in cold temperatures. Stack them to level planters on slopes. Suggested Use: Equally space 4 risers beneath outside edges of pot. If using with a tray – place a set below the tray to prevent water rings or condensation on surfaces, and within the tray beneath the pot to allow the pot to drain freely. POTRISERS have been field tested by the Engineering Laboratory of the University of Washington for strength and field tested for durability. This standard riser, recommended for small to medium pots and statuary, will support up to 1600-pound (per set of 4).
Every item checked for quality -
SunTouch Floor Warming 8 ft. x 30 in. 120-Volt Radiant Floor Heating Mat (Covers 20 sq. ft.)
$239.00 $131.45This 120 volt 8 foot x 30 inch SunTouch floor warming mat adds comfort and a touch of luxury to a home. This ultra-thin, low-profile system installs beneath tile, stone and even vinyl or laminate flooring. It’s ideal for remodeling bathrooms and kitchens and offers an upscale option when designing new construction. It is energy efficient as well as inexpensive to operate. Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels and it is UL listed for safety.
- Energy efficient, inexpensive to operate.
- Dual wire technology reduces electromagnetic fields (EMF) to ultra-low levels.
- Single point power connection makes layout and wiring a snap.
- Armored power lead, wire straight to the electrical box, no conduit required.
- Armored power lead wire straight to the electrical box, no conduit required.
- Single-point power connection to facilitate layout and wiring.
- Mats can be connected in parallel for larger floor surfaces.
- Can be combined with a thermostat control (not included).
Every item checked for quality
