Showing 28–36 of 260 results
-
WIEGMANN Outdoor Enclosure 8 in. x 8 in. x 4 in. NEMA 3R Screw Cover/Pull Box
$59.98 $32.99WIEGMANN 8 In. x 8 In. x 4 In. rain-proof screw cover box is made of pre-galvanized steel and a gray polyester powder inside and out. It is designed for indoor or outdoor locations. The screw cover box features a drip shield top and smooth seamless sides, front, and back, knockouts are standard in the bottom, no gasket is required, hasp for padlocking and provisions for meter seal are provided. A slip on reversible, removable cover is securely fastened with screws located along the bottom edge and ideal for surface mounting.- Model #RSC080804RC.
- Designed for use as wiring boxes and junction boxes.
- Provide protection in outdoor applications against rain, sleet, and snow, or indoors against dripping water.
- ANSI-61 gray polyester powder inside and out.
- Drip shield top and smooth seamless sides and front.
- Mounting holes provided on back of enclosure.
- Hasp for padlocking or meter seal is provided.
Every item checked for quality -
BrassCraft 1/2 in. Nominal Push Connect x 1/2 in. FIP x 20 in. SpeediOne Braided Faucet Connector and 1/4-Turn Straight Valve
$3.64 $2.00Original Retail Price: $17.75.
BrassCraft’s push connect one-piece water supply combines their trusted brass water valve with their flexible braided polymer connector for one quick easy-to-install solution. BrassCraft’s one-piece connection features push connect technology on the valve inlet and a hand-tighten wing nut on the outlet to provide a significant savings in installation time and cost. Push connect valve inlet requires no special tools to install and comes equipped with a pre-inserted tube stiffener to make the product ideal for copper, PEX and CPVC piping systems. The braided polymer fibers of the connector are designed to bend freely without kinking or crimping in tight quarters and resist corrosion caused by chemicals found in common household, tile and glass cleaners. In addition, its reinforced inner hose resists corrosion under harsh water conditions.
- 1-piece unit combines valve and supply line.
- Saves time with one less connection.
- No special installation tools required.
- Installation ready with pre-inserted tube stiffener.
- Fast, reliable and secure.
- Compatible with copper, PEX and CPVC.
- Remove with combination removal tool or 5/8 in. open end wrench.
- Connector bends freely without kinking or crimping in tight quarters.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality -
KODO 120-Watt Equivalent PAR38 LED Motion Sensor Flood Light Bulb Bright White (2-Pack)
$19.87 $10.93The KODO LED Motion Activated Security Floodlights easily convert existing outdoor flood lights to LED motion sensing security lights in seconds. The built-in radar motion sensor detects motion within a 35 ft. range and keeps lights on for 5 minutes after the last detected movement. The sensor detection angle is 100°. Radar technology is more reliable and longer lasting than traditional infrared sensing. The built-in daylight sensor keeps daytime motion from triggering the lights. For 24/7 operation, the motion and daylight sensors can be easily deactivated by a simple flip of the light switch. Great for under eaves, backyards, driveways, doorways and more.
- Radar motion sensor up to 35 ft. turns on lights for 5-minutes.
- 100° detection angle.
- Daylight sensor keeps daytime motion from triggering the lights.
- Easily deactivate sensors to allow for constant 24/7 bulb operation.
- Switch lights ON for normal motion sensor mode.
- Switch OFF, then back ON (within 3-seconds) for always-on, 24/7 operation.
- Switch OFF (for longer than 3 seconds) then back ON to re-activate motion sensor mode.
- 120-Volt, E26 PAR38 bulbs, non-dimmable, 2-pack.
- 1200 Lumens each bulb.
- Not for use with existing motion sensor fixtures.
- Light appearance: 3,000K (bright white).
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Cadet Double-pole 15 Amp Line Voltage 120/240-volt TEP Series 5-2 Day Electronic Programmable Thermostat in White
$68.91 $37.90Save on your home heating bill with the precise technology of this programmable electronic thermostat. Features include touchscreen controls, a large and easy-to-read backlit display, four daily setting options, and more. This line voltage thermostat is compatible with fan-forced in-wall electric heaters, electric baseboard heaters, and with linear and panel convector heaters as well.
- Lower your heating costs with precise temperature control within one degree and simple electronic controls to manage usage.
- Line voltage thermostat compatible with in-wall and baseboard electric heaters (120/208/240-Volt).
- Simple 4-wire installation (double-pole) and includes an off setting.
- 5-2 day programming, with 4 daily events and 4 quick modes, including early start, vacation, comfort and economy.
- Tamperproof your program settings with a security lock.
- Choose temperature display in Celsius or Fahrenheit.
- 15 Amp.
- UL listed in the US and Canada for safety compliance.
Every item checked for quality -
Hampton Bay 22.00 in. Black Adjustable Arm Desk Lamp with Metal Shade
$27.96 $15.38Swing Arm Desk Lamp will beautifully illuminate any home office desk or nightstand while its black finish will complement any decor that you currently have for endless styling options. Adjustable Goose Neck Architect Study Table Lamp, ideal for Eye-Caring Reading Lamp for Home, Office. Clean, simple lines this classic lamp will beautifully illuminate any desk or nightstand.
- Metal shade.
- Black finish.
- Adjustable goose neck.
- Reading lamp for home, office, multi-joint.
- Classic design.
- Clean, simple lines this classic lamp will beautifully illuminate any desk or nightstand.
- Bulb type: E26, 1x40W type A (not included).
Every item checked for quality -
Tzumi 7608 UV Sanitizer with Aromatherapy
$9.09 $5.00Using safe UV-C light, the ionUV Sanitizer effectively eliminates most germs, common pathogenic bacteria and airborne microorganisms, even from the smallest creases and crevices that are difficult-to-impossible to reach with cleaning wipes. Featuring a convenient folding-box design with an extra-deep bed, you have plenty of space to accommodate a wide range of items, whether it be your smartphone or your charger, earbuds, watch, keys, coins, whatever you need to sterilize. For added freshness, a built-in aromatherapy diffuser leaves everything you place within it with a pleasant scentsimply fill the water-tight reservoir with your favorite essential oil, place your item in the bed and close the lid. For liquid-, heat- and chemical-free sanitizing, few methods match UV-C light. Fast and powerful, it fully sanitizes the items you place within the box in as little as ten minutes.
Every item checked for quality -
Troy-Bilt Original Equipment Drive Belt for Select Troy-Bilt 21 in. Mowers and Select Snow Throwers OE 954-04260, 754-04260
$24.98 $13.74Troy-Bilt belts are designed and tested to consistently meet original equipment performance standards. Specially engineered tension and compression materials are used to resist wear and provide optimum strength and performance. For the best cutting performance, routinely inspect belts and replace when they show signs of wear. To protect your investment, specify and use only Troy-Bilt parts.
- Original equipment part for drive belts starting with 954-04260 and 754-04260.
- Belt fits Troy-Bilt 21 in. walk-behind mowers and 2-stage snow throwers.
- Factory tested and approved to provide the perfect fit, strength, durability and performance.
- Oil, heat and dirt resistant material provides superior durability.
- Made of Kevlar material to withstand continuous bending around pulleys.
- Uniform alignment of cords allows for even distribution for wear to maximize performance.
- For detailed installation instructions, please refer to your instruction manual.
Every item checked for quality -
interhasa! Electric Hand Dryer for Commercial Bathrooms
$329.00 $180.95- UPDATED 3rd GENERATION HAND DRYER — This updated Jet hand dryer uses a more powerful main board, thinner cover design, lower noise, and lower power consumption technology. High quality ABS Material and updated structure ensures the product’s life time. Its elegant design makes it a premium decor for all commercial bathrooms.
- HIGH SPEED HAND DRYER – Double-sided Jet design with ultra high speed. 1800 Watts 95m/s air dryer, fast drying within 5-7 seconds, 3 times faster than compact hand dryers. Its speedy dry time and highly refined design creates a refreshing lifestyle and better customer experience in a high traffic area.
- HEPA FILTER – This bathroom hand dryer with built-in high quality HEPA filter is more hygienic. It cleans the air and provides absolutely pure air flow. The detachable air filters can also prevent dust from entering the machine, which also can promise the long life of the air hand dryer.
- LOWER NOISE & ENERGY CONSUMPTION – This electric hand dryer dries hands in less than 7 Seconds using 80% less energy than Normal warm Hand Dryer. Largely saves Electricity and Costs less to run. The best Hand Drying alternative for any environment with 70% smaller carbon footprint than Paper Towels.
- WALL MOUNTED & EASY INSTALLATION – With a modern and sleek design, this jet hand dryer is suitable for public school, hospital, star hotels, airports, shopping malls, restaurant, and other consistently high-traffic restrooms.
Every item checked for quality
