Showing 46–54 of 260 results

Filters
  • WIEGMANN Indoor Enclosure 6 in. x 6 in. x 4 in. NEMA 1 Screw Cover/Pull Box

    WIEGMANN 6 in. x 6 in. x 4 in. screw cover pull box is made of pre-galvanized steel and designed for indoor locations. The product is ideal for surface mounting or allows runs of conduit for power or communication conductors. Boxes have flat, removable covers fastened with screws. Holes are provided in back for mounting. NEMA 1 enclosures are intended for indoor use, primarily to provide a degree of protection against contact with the enclosed equipment in locations where unusual service conditions do not exist. The enclosures shall meet the rod entry and resistance tests.
    • Model #SC060604RC.
    • Designed for use as wiring boxes and junction boxes.
    • Provide a degree of protection against contact with the enclosed equipment.
    • ANSI-61 gray polyester powder inside and out.
    • Removable concentric knockouts on all four sides.
    • Mounting holes provided on back of enclosure.
    • Cover easily removed without extracting cover screws.
    Green checkmark of qualityEvery item checked for quality
    $25.98 $14.29
  • interhasa! Electric Hand Dryer for Commercial Bathrooms

    • UPDATED 3rd GENERATION HAND DRYER — This updated Jet hand dryer uses a more powerful main board, thinner cover design, lower noise, and lower power consumption technology. High quality ABS Material and updated structure ensures the product’s life time. Its elegant design makes it a premium decor for all commercial bathrooms.
    • HIGH SPEED HAND DRYER – Double-sided Jet design with ultra high speed. 1800 Watts 95m/s air dryer, fast drying within 5-7 seconds, 3 times faster than compact hand dryers. Its speedy dry time and highly refined design creates a refreshing lifestyle and better customer experience in a high traffic area.
    • HEPA FILTER – This bathroom hand dryer with built-in high quality HEPA filter is more hygienic. It cleans the air and provides absolutely pure air flow. The detachable air filters can also prevent dust from entering the machine, which also can promise the long life of the air hand dryer.
    • LOWER NOISE & ENERGY CONSUMPTION – This electric hand dryer dries hands in less than 7 Seconds using 80% less energy than Normal warm Hand Dryer. Largely saves Electricity and Costs less to run. The best Hand Drying alternative for any environment with 70% smaller carbon footprint than Paper Towels.
    • WALL MOUNTED & EASY INSTALLATION – With a modern and sleek design, this jet hand dryer is suitable for public school, hospital, star hotels, airports, shopping malls, restaurant, and other consistently high-traffic restrooms.
    Green checkmark of qualityEvery item checked for quality
    $329.00 $180.95
  • Hampton Bay Universal Matte Black Ceiling Fan LED Light Kit

    The Hampton Bay Universal Light Kit is designed to complement your ceiling fan and add functionality. The universal design translates to easy installation and is compatible with most ceiling fans. The matte black finish and decorative cage design adds a modern industrial look. One 6.5-Watt LED bulb included.

    • Matte black finish.
    • For indoor use only.
    • Decorative industrial cage design.
    • Universal design is compatible with most ceiling fans.
    • Easy installation.
    • Convenient pull-chain control.
    • 1 medium base clear 6.5-Watt LED bulb included (A19 shape / 810 lumens / 2700K).
    • Can be dimmable if installed with a dimming switch or remote control with dimming function.
    • Finishes shown are representative of the item, actual finish may vary slightly.
    Green checkmark of qualityEvery item checked for quality
    $51.96 $28.58
  • InSinkErator Indulge Modern Series 1-Handle 9.25 in. Faucet for Instant Hot Water Dispenser in Matte Black

    This InSinkErator Indulge Modern Instant Hot Water Dispenser for use with our Stainless Steel Tank (sold separately) model provides filtered 200F near-boiling water for a variety of uses. The InSinkErator Modern instant hot water dispenser is perfect for any cooking connoisseur. The Indulge Modern instant hot water dispenser features stunning clean lines, blending efficiency and style. Designed for use with the re-engineered InSinkErator Stainless Steel Tank and Filtration System, enjoy hot, filtered water right when you need it – now.

    • Compatible with InSinkErator Stainless Steel Hot Water Dispenser Tanks & Filtration Systems (sold separately).
    • Graceful, high-arch swivel spout makes filling pots & pitchers quick and easy.
    • Durable brass faucet dispenses near-boiling water up to 200°F.
    • Hot water lever automatically shuts off when not in use.
    • For use with the InSinkErator stainless steel tank and filtration system (sold separately).
    Green checkmark of qualityEvery item checked for quality
    $454.69 $250.08
  • HGN Metal Faucet Glass Rinser for Kitchen Sink in Brushed Nickel

    • Original retail price: $55.29/$65.99.
    • Brushed Nickel finish can be matched perfectly with your kitchen environment. Multi-angle water outlet cleaning head has multi-angle spraying holes that effectively wash your cup, saving time and effort – convenient and practical.
    • From wine glasses to baby bottles to travel cups, it conveniently rinses virtually any drinkware, so you can spend less time soaking and scrubbing. Brushed Nickel finish resists water spots and fingerprints.
    • Put the mouth of the cup downward and press the bottom of the cup lightly to automatically spray water for cleaning. When the cup is cleaned, remove the cup and stop spraying water.
    • Simple DIY replacement for a soap dispenser, kitchen sprayer or sink hole cover – the perfect complement to your kitchen faucet. It only takes a few minutes to install our glass rinser all by yourself.
    Green checkmark of qualityEvery item checked for quality
    $36.36 $20.00
  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector (1/2 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (85,000 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00
  • Commercial Electric 2 in. White True Baffle LED Integrated Trimless Recessed Lighting Kit

    Integrated all-in-one recessed lights are the homeowners dream; perfect for value-added lighting upgrades to enhance the look of your interior with the highest quality LEDs without breaking the bank. With a low profile junction box and push and click quick connects, these lights are very easy to use. The petite 2-inch size sits flush in the ceiling without a decorative trim allowing you to create trendy pockets of light. The lights are rated 90 CRI, enhancing the appearance of the true colors, while a 3000-kelvin color temperature provides a soft white light. With ENERGY STAR Certification and lasting 50,000 hours, this LED Integrated Recessed Light lasts for years to come saving you time, energy and money.

    • LIGHT SPECS: 6W Integrated LED – 370 lumens – 3000 kelvin (warm white) – 90 CRI – Energy Star Certified – 40-degree beam angle – 50,000 hour lifespan – 2.25-inch hole size – 2.44-inch trim size.
    • PETITE ARCHITECTURAL SIZE: the petite 2-inch size is ideal for creating different lighting ambiance and designs creating unique lighting for any space.
    • DIMMABLE: with a LED compatible dimmer switch to provide the perfect ambiance for any mood or occasion (dimmer switch sold separately).
    • IC RATED: for direct contact with insulation – no recessed can required – CEC Title 24 Compliant.
    • EASY INSTALL: a trimless profile, integrated LED and a slim junction box that will not interfere with your joists or ductwork – the effortless push and click quick connects allows for worry free, easy installation and are the choice of professional electricians.
    • WET RATED AND AIRTIGHT: perfect for showers, bathrooms, outdoor soffits and all general lighting applications.
    • ENERGY STAR CERTIFIED: reduce energy, maintenance and cooling costs with an Energy Star certified integrated LED, meeting the highest Energy Star standards, this light is sure to be the highest quality product for years to come.
    Green checkmark of qualityEvery item checked for quality
    $22.96 $12.63
  • Sharkbite Prolock 1 In. Push-To-connect Plastic 90-Degree Elbow Fitting Pro Pack (3-Pack)

    SharkBite ProLock fittings are a versatile and innovative full-flow plumbing system utilizing push lock fitting technology and engineered specifically for use with SharkBite PE-RT and PEX pipe. The SharkBite 1 in. Push-to-Connect 90° Elbow intuitive design makes for one of the simplest and most dependable fittings on the market. No tools are required to make a connection. They use a collet with stainless steel teeth that grips the pipe when fully inserted, and an EPDM O-Ring to provide a permanent, leak-proof seal. The Twist-to-lock technology ensures maximum security. When twisted into place with indicator arrows aligned, the locking cap locks the pipe in place and creates an audible click. Removing a SharkBite fitting is just as easy with no tools needed; simply twist the cap turn counterclockwise to unlock then depress collet against the fitting to remove the pipe. ProLock fittings are suitable for hot and cold potable water and hydronic heating applications. They have been specifically designed for the Professional Plumber. Code approved for behind-the-wall installations.

    Green checkmark of qualityEvery item checked for quality
    $28.96 $15.93
X