Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
  2. Shop
    3. Page 7

Showing 55–63 of 260 results

Filters

  • BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve, #73

    BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.

    • Compatible with PEX, copper and CPVC.
    • Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
    • Installation ready: requires no special tools, soldering or glue for a watertight seal.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Pre-inserted tube stiffener is “installation ready” for a faster connection.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • Chrome-plated brass.
    • Temperature rating: 40° to 160°F.
    • Pressure rating: 125 psi maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • American Metal Products 4 in. x 7 ft. Standard Oval 45-Degree Elbow

    Designed for use with 4 in. steel pipe, this 4 in. x 7 ft. Standard Oval 45° Elbow helps you create an effective heating, ventilation and air conditioning (HVAC) system. Its 1-piece body offers easy installation. Pioneer in the development and simplification of effective venting products. Amerivent components are crafted for today’s building and appliance requirements.

    • Galvanized steel.
    • For use in an HVAC system.
    • Oval shape.
    • 45° elbow.
    • Compatible with 4 in. steel pipe.
    • 1-piece construction.
    Green checkmark of qualityEvery item checked for quality
    $26.20 $14.41

  • 1-1/2 in. Center Stop PVC Coupling Conduit Fitting

    This connector consists of two solvent weld female ends. A center stop ensures positioning of conduit. The coupling is made of rigid PVC.

    • Connects conduit of the same diameter.
    • Non-corrosive PVC construction.
    • Joins metal conduit to PVC conduit or PVC to PVC.
    • UL and CSA safety listed for greater safety and peace of mind.
    Green checkmark of qualityEvery item checked for quality
    $1.51 $0.83

  • 2″ Insulated Ground Bushing

    Bridgeport 386-DC 2″ Die Cast w/Plastic Metaliner Insulated Grounding Bushing for Rigid/IMC Conduit.

    • Material: Ball Burnished Mirror Smooth Die-Cast Zinc.
    • Approval: UL 514B, UL (Canada and US).
    • Used On: IMC/Rigid Conduit.
    • Additional Information: ROHS Compatible; Applicable Standard Federal Specification A-A-50553, NEMA FB-1; Insulator Material Nylon; Insulation Temperature 150 Deg C.
    • Type: Threaded.
    • Trade Size: 2 Inch.
    • Wire Size: 14 AWG Solid to 1/0 AWG Stranded.
    • Lug Type: Tin Electroplated 6061-T6 Aluminum Alloy.
    • Throat Type: Insulated.
    • Diameter: 2-5/8 Inch.
    • Height: 1/16 Inch.
    Green checkmark of qualityEvery item checked for quality
    $4.67 $2.57

  • ECHO YOUCAN Fuel System Kit 225 Series Models

    Keep your ECHO equipment running like new by extending engine performance and longevity with the 90127Y Fuel System Kit. Fuel system components are vital to engine health. Regular fuel system maintenance will prevent dirt and debris from entering your carburetor. Blocked or partially clogged fuel filters will cause hard starting and low power output. Being proactive with routine maintenance can save you time, money, and downtime. The Fuel System Kit contains genuine ECHO replacement parts.

    • Includes: fuel filter, fuel lines, grommet, fuel cap, gasket, fuel tank vent and purge bulb.
    • For use on: ECHO trimmers, brushcutters, edgers, and power attachment series (PAS).
    • Fits models: GT-225/i/L/SF, SRM-225/i/SB/U, PE-225, PAS-225/SB.
    • Fuel components should be inspected every 3 months or 90 hours, or per your operators manual, and replaced on a yearly basis.
    • Product is regulated for use with off-road engines and equipment under EPA 40 CFR Part 1060 and must be used on engines/equipment built after 1/1/2012.
    Green checkmark of qualityEvery item checked for quality
    $14.98 $8.24

  • Wilkins 3/4 in. Lead Free Brass NPT Pressure Relief Valve

    The P1000AXL-150C Pressure Relief Valve is set at 150 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.

    • Eliminates risk of over-pressure of storage tanks.
    • Epoxy-coating adds extra protection.
    • Pressure relief valve set at 150 psi.
    • CSA Compliance to ANSI Z21.22/CSA 4.4.
    • Certified to ASME Section IV by National Board.
    • Pressure relief valve settings of 30, 75, 125, and 150 psi offer versatility.
    Green checkmark of qualityEvery item checked for quality
    $37.40 $20.57

  • RACO 1/2 in. Uninsulated Liquid-Tight Connector, 1-Pack

    Suitable for indoor or outdoor locations to connect flexible metallic liquidtight conduit or Type B flexible non-metallic conduit to a box or enclosure. Features our split-gland ring that ensures a liquidtight seal. Zinc electroplated for corrosion resistance.

    • Steel and malleable iron construction provides raceway integrity.
    • Sealing washer provides a liquidtight seal when terminating the connector in a threadless opening.
    • Locknut provided.
    • Suitable for use in class 1, div 2, class 2, div 1 and 2, class 3, div 1 and 2 hazardous locations.
    Green checkmark of qualityEvery item checked for quality
    $3.31 $1.82

  • ClosetMaid Impressions 28.7 in. W X 28.7 in. D X 41.1 in. H Chocolate Wood Corner Unit, Brown

    This ClosetMaid Impressions Corner Unit is ideal to make the most of corner space in your closet. 3 fixed shelves provide ample room for shoes, boxes and folded clothes. Featuring a rich embossed chocolate finish, the unit includes decorative trim and is designed to nestle between 2 closet towers.

    Green checkmark of qualityEvery item checked for quality
    $99.16 $54.54

  • PEX-a Expansion Tool (Tool-Only)

    The Apollo ExpansionPEX Expansion Tool is a bare tool without expander heads. When combined with Apollo ExpansionPEX Expander Heads, the tool provides consistent and reliable expansion of Apollo ExpansionPEX tubing. The Apollo ExpansionPEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed…

    Green checkmark of qualityEvery item checked for quality
    $99.98 $54.99
X