Showing 64–72 of 260 results

Filters
  • Troy-Bilt Original Equipment Drive Belt for Select Troy-Bilt 21 in. Mowers and Select Snow Throwers OE 954-04260, 754-04260

    Troy-Bilt belts are designed and tested to consistently meet original equipment performance standards. Specially engineered tension and compression materials are used to resist wear and provide optimum strength and performance. For the best cutting performance, routinely inspect belts and replace when they show signs of wear. To protect your investment, specify and use only Troy-Bilt parts.

    • Original equipment part for drive belts starting with 954-04260 and 754-04260.
    • Belt fits Troy-Bilt 21 in. walk-behind mowers and 2-stage snow throwers.
    • Factory tested and approved to provide the perfect fit, strength, durability and performance.
    • Oil, heat and dirt resistant material provides superior durability.
    • Made of Kevlar material to withstand continuous bending around pulleys.
    • Uniform alignment of cords allows for even distribution for wear to maximize performance.
    • For detailed installation instructions, please refer to your instruction manual.
    Green checkmark of qualityEvery item checked for quality
    $24.98 $13.74
  • ECHO YOUCAN Fuel System Kit 225 Series Models

    Keep your ECHO equipment running like new by extending engine performance and longevity with the 90127Y Fuel System Kit. Fuel system components are vital to engine health. Regular fuel system maintenance will prevent dirt and debris from entering your carburetor. Blocked or partially clogged fuel filters will cause hard starting and low power output. Being proactive with routine maintenance can save you time, money, and downtime. The Fuel System Kit contains genuine ECHO replacement parts.

    • Includes: fuel filter, fuel lines, grommet, fuel cap, gasket, fuel tank vent and purge bulb.
    • For use on: ECHO trimmers, brushcutters, edgers, and power attachment series (PAS).
    • Fits models: GT-225/i/L/SF, SRM-225/i/SB/U, PE-225, PAS-225/SB.
    • Fuel components should be inspected every 3 months or 90 hours, or per your operators manual, and replaced on a yearly basis.
    • Product is regulated for use with off-road engines and equipment under EPA 40 CFR Part 1060 and must be used on engines/equipment built after 1/1/2012.
    Green checkmark of qualityEvery item checked for quality
    $14.98 $8.24
  • Juno 75-Watt Flared Steps Satin Chrome Track Lighting Head

    The Juno Trac-Lites Flared-Step Track Light offers a contemporary shape. It provides exceptional task and accent lighting when installed on the economical Juno Trac-Lites system. The perfect blend of form, function and value, this fixture features a durable, drawn-steel housing with a high-quality satin chrome finish.

    • Bulb NOT Included.
    • Drawn-steel track light housing with satin chrome finish is durable and attractive.
    • 90° vertical aiming capability and 358° rotation permit light-beam adjustment for virtually any task or accent lighting application.
    • Spring-loaded locking latch on mounting adapter provides secure attachment of fixture to track.
    • Patented, embossed polarity arrow on bottom of mounting adapter assures proper electrical connection.
    Green checkmark of qualityEvery item checked for quality
    $26.29 $14.46
  • 75-Watt Equivalent BR40 Dimmable LED Light Bulb Daylight (12-Pack)

    The BR40 LED-daylight is an indoor flood light bulb with a perfect BR40 shape to fit your indoor recessed cans or track light fixtures. Use this bulb in locations such as kitchens, living rooms or home offices. It is a perfect replacement of your traditional incandescent, CFL or halogen lamps. It only uses 10.5-Watt and can last up to 10-years based on a 3-hour a-day usage schedule. The bright white light color creates a relaxing and comfortable hue and is particularly good for a lively dinner environment.

    • Brightness: 985 Lumens.
    • Estimated-yearly energy cost: $ 1.26 (based on 3-hours/day, 11/kWh, costs depend on rates and use).
    • Life: 10-year (based on 3-hours/day).
    • Light appearance: 5,000K (daylight).
    • Energy used: 12-Watt (equivalent to a 75-Watt standard).
    • Ideal for use in recessed cans and track light fixtures.
    Green checkmark of qualityEvery item checked for quality
    $39.98 $21.99
  • RUGPADUSA Essentials 9 ft. x 12 ft. Hard Surface 100% Felt 1/4 in. Thickness Rug Pad

    If you’re looking for some cushion under your rugs that won’t break the bank, RUGPADUSA Essentials is for you. These felt rug pads are 1/4 in. thick 100% recycled fiber. They add comfort underfoot and help with noise reduction on rugs that don’t require a non-slip pad. Our pads are manufactured and made to withstand heavy traffic while protecting your rugs and your floors. We stock Essentials in the most common sizes for rugs, and they can easily be modified with a pair of household scissors.

    • 100% felt padding buffers foot traffic, traps dirt, and prolongs the life of rugs and floor surfaces.
    • Needle-punched felt.
    • Dense, thick felt provides cushion underfoot.
    • Will not strip, discolor, or damage any floor surfaces.
    • Made with 100% pre-consumer, recycled fibers for long lasting comfort and durability.
    • Low VOC emissions keep your family safe from harmful irritants.
    Green checkmark of qualityEvery item checked for quality
    $87.51 $48.13
  • RYOBI Rotary Tool Smooth Flame Material Removal Burr (For Wood, Plastic, Fiberglass and Drywall)

    Introducing the Rotary Tool Smooth Flame Material Removal Burr. For smooth flowing, concave and v-shaped cuts, this burr offers 4X more material removal than the standard burr. Proudly made in the USA. This accessory offers universal fitment and is compatible with any rotary tool including Dremel. Expand your hobby and maker capabilities with this RYOBI accessory.

    • For Smooth Flowing, Concave, and V-Shaped Cuts.
    • For use on wood, plastic, fiberglass, and drwyall.
    • 4X More Material Removed Than Standard Burr.
    • 1/8 in. Shank.
    • 35,000 Max RPM.
    • USA Made.
    Green checkmark of qualityEvery item checked for quality
    $19.96 $10.98
  • Prime-Line Products Sliding Door Handle and Hook Latch Set in White – C 1253

    • Part Number: ‎C 1253.
    • Die cast construction.
    • Finished in white.
    • Mortise lock and steel keeper; Handle Type: Surface Mounted.
    • 4-15/16 in. mounting hole centers; Fits door thicknesses from 1-1/4″ to 1-3/8″.
    Green checkmark of qualityEvery item checked for quality
    $55.07 $30.29
  • Hampton Bay Kenmont 4 ft. 4-Light Brushed Nickel Integrated LED Wave Fixed Track Lighting Kit

    This 4-light fixed track offers a modern style in a brushed nickel finish. The unique design of the movable head gives an immaculate LED light output. The stylish design will add a sophisticated look to any home.

    • Brushed nickel finish for corrosion resistance.
    • Integrated 3000K warm white LED, no bulbs to replace.
    • Adjustable lamp heads to direct light.
    • Only uses 12-Watt of power.
    • Light output of 1600 Lumens.
    • Dimmable.
    • 120-Volt.
    Green checkmark of qualityEvery item checked for quality
    $159.00 $87.45
  • #1, STRM006CR, Chrome Single Lever Pull-Down Kitchen Faucet

    • Model: Star Mini Spring Pull Out Kitchen Mixer – STRM006CR.
    • Function: Single Lever Pull-Down Kitchen Mixer/Faucet.
    • Configuration: Single-Hole Installation.
    • Finish: Chrome.
    • Brand: Modern National.
    • Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
    • Installation Instructions are Included.
    Green checkmark of qualityEvery item checked for quality
    $100.00 $55.00
X