Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home

Category: Plumbing

Showing 1–9 of 63 results

Filters

  • BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Outlet Diameter Compression Outlet 1/4-Turn Angle Valve, #64

    BrassCraft 1/2 in. Nominal push connect inlet x 3/8 in. Outlet Diameter push connect outlet 1/4-turn angle valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a 90 turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.

    • 1-piece body construction provides strength, durability and long-lasting performance.
    • 1/2 in. nominal push connect x 3/8 in. OD push connect.
    • Compatible with copper, PEX or CPVC tubing.
    • For use in potable water distribution systems, not intended for recirculating water systems that produce continuous use temperatures above 115°F for those applications, use our KT series ball stops.
    • Smooth, quarter-turn operation, on/off flow control with a 90 turn of the handle.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • Installation ready: requires no special tools, soldering OT glue for a watertight seal.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • Everbilt 1/10 HP Non-Submersible Self-Priming Transfer Pump

    The Everbilt 1/10 HP non-submersible self-priming transfer pump is designed for portable and residential applications. It can drain or remove water from window wells, clogged sinks, basements, water basins, stock tanks, boats, fish tanks, water heaters, swimming pool covers, low spots in yards, or other flooded areas. It is not approved for use in swimming pools or in salt-water marine areas.

    • Includes 6 ft. suction hose, suction strainer, puddle strainer and a set of replacement motor brushes.
    • Made of high strength, corrosion resistant materials for trouble free service for years.
    • Pump clear water; do not pump fuel or other flammable liquids.
    • Pump not intended to be permanently installed.
    • Not intended for use in sewage or septic systems.
    • To help prolong the life of the impeller, before each use it is recommended to fill the motor housing with 1-2 teaspoons of water or vegetable oil.
    • Maximum discharge head of 48 ft.
    • Motor is fan cooled and thermally protected.
    • 8.36 ft. power cord.
    Green checkmark of qualityEvery item checked for quality
    $109.09 $60.00

  • #11, STRM006BN, Brushed Nickel Spiraled Single Lever Pull-Down Kitchen Faucet

    • Model: Star Mini Spring Pull Out Kitchen Mixer – STRM006BN.
    • Function: Single Lever Pull-Down Kitchen Mixer/Faucet.
    • Configuration: Single-Hole Installation.
    • Finish: Brushed Nickel.
    • Brand: Modern National.
    • Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
    • Installation Instructions are Included.
    Green checkmark of qualityEvery item checked for quality
    $100.00 $55.00

  • Everbilt 3/4 in. Compression x 3/4 in. MIP Brass Adapter Fitting

    Use these Camco 3/4 in. x 3/4 in. brass compression fittings for evaporative coolers to create a watertight connection at the end of an evaporative cooler pipe and fitting. Measurement is 3.63 in. in width and 5.5 in. in height. No solder or adhesives are needed for installation.

    • Compatible with most evaporative cooler pipes measuring 3/4 in. x 3/4 in.
    • Watertight fit.
    • Durable brass construction.
    • Used to create a watertight connection between a pipe, fitting and evaporative cooler.
    • Installs easily without solder or adhesives.
    Green checkmark of qualityEvery item checked for quality
    $12.98 $7.14

  • Advanced Drainage Systems 4 in. Singlewall External Snap Coupler

    Advanced Drainage Systems, Inc. (ADS) 4″ Single Wall External Coupler is the contractor’s choice for connecting two sections of 4″ single wall pipe. The coupler snaps over the ends of each section easily for a secure connection. Made of HDPE the 4″ external coupler is designed to last the life of the drainage system.

    Green checkmark of qualityEvery item checked for quality
    $4.73 $2.60

  • Arrowhead Brass Chrome Fine Thread Self Draining Vacuum Breaker

    The VPC PK1390 is a replacement self-draining vacuum breaker for frost free hydrants with FINE THREADS (will not connect to hose threaded faucet). A must on all outdoor systems. It can easily be adapted with new installs or existing systems.

    • Red brass construction, nickel plated for protection from extreme weather.
    • Drains water from faucet upon shut off.
    • For replacing leaking vacuum breakers on fine threaded hose-bibs and sillcocks.
    • Red brass with 80-83% copper content.
    • For outdoor use; not for potable water.
    • ASSE 1019 approved; IAMPO certified.
    Green checkmark of qualityEvery item checked for quality
    $24.98 $13.74

  • Apollo 3/4 in. Brass PEX-B Barb x 3/4 in. Male Pipe Thread Adapter (5-Pack)

    The ApolloPEX 3/4 in. Brass PEX Barb x 3/4 in. Male Pipe Thread Adapter is simple to install. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX adapters can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

    • Most economical piping system available.
    • Meets UPC, IPC and cUPC standard.
    • Can secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves.
    • NSF listed.
    • Barb x MIP connection for PEX plumbing systems.
    • Maximum working pressure of 200 psi and maximum temperature of 200 degree F.
    Green checkmark of qualityEvery item checked for quality
    $16.45 $9.05

  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (1/2 in. OD) w/Safety+Plus2 Thermal Excess Flow Valve (60,500 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • Everbilt Piggy Back Float Switch for Sump and Sewage Pumps

    The universal design of the PiggyBack Float Switch from Everbilt is compatible with various sump pumps. The perfection solution to replacing the switch for your sump and sewage pumps. Features a wide-angle tethered design and ideal for use in larger diameter basins of 14 in. or more.

    • Replacement switch for sump and sewage pumps.
    • When connecting to a pipe or pump, the float needs 4 in. of tether to operate properly; it must be able to float into an upward position so that the ball bearing inside the switch makes contact to turn the pump on.
    • In order for the float to operate freely, the basin should be at least 14 in. wide and 16 in. deep; if not, the float could become stuck on the wall of the sump basin.
    • 8 ft. cord.
    • Piggyback plug.
    • Switch can be directly wired to 230-Volt control panels by cutting off the plug, see project ideas in ‘Info and guides’ for wiring diagram.
    Green checkmark of qualityEvery item checked for quality
    $34.00 $18.70
X