Showing 1–9 of 64 results
-
Everbilt Vertical Float Switch for Sump Pumps
$42.00 $23.10Replace your sump and sewage pump switch with the Everbilt Vertical Float Switch. It’s perfect for use in small pits or basins and conveniently includes brackets and clamps for installation to the discharge pipe. The universal design makes it compatible with all models with piggyback float switches.
- Approximately a 4 in. on/off span.
- On/off height can be adjusted by moving rubber grommet.
- 8 ft. cord.
- Works with pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC.
- 115-Volt plug attached can be removed for direct wiring.
- Compatible with all models with piggyback float switches.
Every item checked for quality -
Delta Universal Seats and Springs Repair Kit
$5.98 $3.29Repair leaks in your bathroom or kitchen faucet with the Delta Universal Seats and Springs Repair Kit. The kit is compatible with Delta faucets that have stainless-steel ball valves (faucets and ball valves not included).
- Use in Delta faucets with stainless-steel ball valves (faucets and ball valves not included).
- Repairs leaks in kitchen faucets.
- Can be used to repair leaks in bath faucets.
- Includes 1 set of seats and springs.
- Genuine Delta repair kit.
Every item checked for quality -
Everbilt Shower Mixing Valve Collar for Shower Valves and Handles
$10.47 $5.76The Everbilt waterproof mixing valve collars are designed to seal mixing shower valves to prevent leaking and mold growth. These thin, high-quality, reliable mixing valve collars are made from very strong, tear-resistant polyethylene fibers that prevents moisture from penetrating deep into walls, and offers optimum connection to tile laying materials. Thus, the Everbilt mixing valve collars provide an excellent watertight seal, are 100% waterproof, and top rated for steam shower applications. Installation is easy over smooth, shower wall surfaces as these collars can be fixed in place with modified or non-modified thin-set mortar suitable for tile or stone finishes. The package includes one mixing valve collar, and is part of the Everbilt waterproofing kit, along with the Everbilt pipe collar, Everbilt inside corners and Everbilt outside corners, sold separately. Thickness 0.1 in.
- Designed to seal mixing shower valves to prevent leaking and mold growth.
- Thin, high-quality, reliable.
- Made from very strong, tear-resistant polyethylene fibers that prevents moisture from penetrating deep into walls.
- Provides an excellent watertight seal.
- 100% Waterproof.
- Top rated for steam shower applications.
- Can be fixed in place with modified or non-modified thin-set mortar.
- Includes one piece of mixing valve collar.
- Also included in Everbilt waterproofing kit.
Every item checked for quality -
2-Piece Pack: NIBCO 3/4 in. x 3/4 in. CPVC-CTS 90-Degree Slip x Slip Elbow Fitting
$1.82 $1.002-Piece Pack! Model/Part #C470734. Suited for hot and cold water pressure distribution systems, this 90° slip x slip elbow features female socket connections and is used to easily change the direction of flow. Chlorinated Polyvinyl Chloride (CPVC) has proven to be an excellent material for hot corrosive liquids, hot and cold water distribution, and similar applications above the temperature range of PVC. CPVC will not rust, pit, scale or corrode. CPVC fittings are easy to install and are joined by solvent cementing or threading.
Every item checked for quality -
Charlotte Pipe 2 in. PVC DWV 22-1/2-Degree Hub x Hub Street Elbow Fitting
$5.31 $2.92PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140°F. PVC is lightweight and easy to install. They require no special tools for cutting, and can be installed with solvent cementing, threading, flanging, and roll-grooved joining.
Every item checked for quality -
BrassCraft Safety+PLUS2 Thermal Excess Flow valve (36,800 BTU) 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector
$27.27 $15.00BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. ID (3/8 in. OD).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
#63, BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. OD Push Connect Outlet 1/4-Turn Straight Valve
$5.45 $3.00BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. OD Push Connect Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.
- Original retail price: $10.46.
- 1-piece body construction provides strength, durability and long-lasting performance.
- 1/2 in. nominal push connect x 3/8 in. OD push connect.
- Compatible with copper, PEX or CPVC tubing.
- For use in potable water distribution systems, not intended for recirculating water systems that produce continuous use temperatures above 115°F for those applications, use our KT series ball stops.
- Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
- 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
- Easy-to-remove handle protects against accidental operation during rough-ins.
- Installation ready: requires no special tools, soldering to glue for a watertight seal.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector (1/2 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (85,000 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality -
Pfister S60-151A 2-3/4 in. Zinc Die-Cast Crown Imperial Shower Flange with Sleeve in Chrome
$35.42 $19.48Flanges provides a decorative way to cover the stems of a faucet. S60-151A Crown Imperial Shower Flange is for use with new style Pfister shower valves. 2-piece design for easier installation.
- 2-3/4 in. O.D.
- Chrome finish.
- Includes set screw.
- Tube and flange design.
- Genuine Pfister replacement part.
- Internal threads to mount to stem.
Every item checked for quality
