Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home

Category: Plumbing

Showing 1–9 of 52 results

Filters

  • Charlotte Pipe 4 in. x 4 in. x 1-1/2 in. PVC DWV Wye Reducing

    PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140F. PVC is lightweight and easy to install. They require no special tools for cutting and can be installed with solvent cementing, threading, flanging and roll-grooved joining.

    Green checkmark of qualityEvery item checked for quality
    $38.82 $21.35

  • Residential Wired Main Remote Control for Tankless Gas Water Heaters

    UMC-117 main remote-control pad. Allows for easy temperature adjustment and maintenance information access. Connect up to 3 remote controls to your tankless system.

    • Digital display system remote.
    • Water resistant.
    • 140° maximum.
    • Precise temperature control 2° increments.
    • for Rheem branded Tankless Gas Mid or High Efficiency water heaters.
    Green checkmark of qualityEvery item checked for quality
    $62.07 $34.14

  • BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Outlet Diameter Compression Outlet 1/4-Turn Angle Valve, #64

    BrassCraft 1/2 in. Nominal push connect inlet x 3/8 in. Outlet Diameter push connect outlet 1/4-turn angle valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a 90 turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.

    • 1-piece body construction provides strength, durability and long-lasting performance.
    • 1/2 in. nominal push connect x 3/8 in. OD push connect.
    • Compatible with copper, PEX or CPVC tubing.
    • For use in potable water distribution systems, not intended for recirculating water systems that produce continuous use temperatures above 115°F for those applications, use our KT series ball stops.
    • Smooth, quarter-turn operation, on/off flow control with a 90 turn of the handle.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • Installation ready: requires no special tools, soldering OT glue for a watertight seal.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • BrassCraft 1/2 in. Nom Push Connect x 7/8 in. Ballcock x 12 in. SpeediOne Braided Toilet Connector and 1/4-Turn Straight Valve

    Original Retail Price: $17.75.

    BrassCraft has created an easy-to-install, one-piece connection. By combining our trusted bass supply stops with our dependable braided, vinyl and stainless steel connector – the results is a quick and easy installation. One-piece connectors are available in a wide variety of options for faucet, toilet and dishwasher applications.

    • Connector is constructed with flexible braided polymer; stop is chrome plated brass.
    • 1/2 in. nominal push connect x 1/2 in. FIP.
    • No special installation tools required.
    • Use in hot or cold water applications.
    • Durable, flexible water connector requires no cutting or soldering during installation.
    • Compatible with copper, PEX, and CPVC.
    • Remove with combination removal tool or 5/8 in. open end wrench.
    • Connector bends freely without kinking or crimping in tight quarters.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $3.64 $2.00

  • BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve, #73

    BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.

    • Compatible with PEX, copper and CPVC.
    • Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
    • Installation ready: requires no special tools, soldering or glue for a watertight seal.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Pre-inserted tube stiffener is “installation ready” for a faster connection.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • Chrome-plated brass.
    • Temperature rating: 40° to 160°F.
    • Pressure rating: 125 psi maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • Cash Acme 3/8 in. Compression HG-135 Thermostatic Mixing Valve with Compression Tee

    The HG135 is a sleek and compact point of use mixing valve designed to assist in the prevention of scalding. It features a superior, fast acting thermostatic element that provides stable operation at flow rates as low as 0.25 gm (0.95 pm). The Heatguard 135 also reduces the outlet flow to a trickle in the event of a cold water supply failure. The valve inlets and outlet connections are standard 3/8″ supply line compression connections for use with 3/8 in. OD tube. The inlets of the valve feature check valves to prevent cross contamination as well as serviceable strainer screens to prevent the valve from being clogged with dirt or debris. Each valve includes a purpose built mounting bracket and hardware to neatly and securely fasten the valve to the wall. The compact design and pleasant aesthetics allow for this valve to easily be fit under or behind a single basin. Adjustable outlet temperature range: 100°-120°F (38°-49°C).

    • Intended for point of use/under sink installations to provide safe outlet water temperature.
    • Ideal for individual faucets and electronic faucets.
    • ASSE 1070 approved.
    • Listed by ASSE, CSA, IAPMO.
    • Accurate temperature control with flows as low as 0.25 gpm.
    • Robust, low complexity design and total flow shut-off if cold supply fails.
    Green checkmark of qualityEvery item checked for quality
    $78.40 $43.12

  • #5, BrassCraft 1/2 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve

    Gain control of your household plumbing fixtures with this BrassCraft 1/2 in. FIP Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve. Stop the water flow with the 90 degree water handle design and you can perform maintenance and repair without shutting off the water to the entire home. he straight valve is most often used where the water pipe enters the room from the floor.

    • Compatible with iron pipe.
    • Smooth on/off flow control with a quarter turn (90°) turn of the handle.
    • Smooth on/off flow control with a quarter turn (90°) turn of the handle.
    • Easy to install.
    • 1-piece body construction for strength, durability and long-lasting performance.
    • Chrome-plated brass.
    • Temperature rating: 40° to 160°F.
    • Pressure rating: 125 psi maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112,18,1/CSA B125,1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • BrassCraft 1/2 in. Nominal Push Connect x 1/2 in. FIP x 20 in. SpeediOne Braided Faucet Connector and 1/4-Turn Straight Valve

    Original Retail Price: $17.75.

    BrassCraft’s push connect one-piece water supply combines their trusted brass water valve with their flexible braided polymer connector for one quick easy-to-install solution. BrassCraft’s one-piece connection features push connect technology on the valve inlet and a hand-tighten wing nut on the outlet to provide a significant savings in installation time and cost. Push connect valve inlet requires no special tools to install and comes equipped with a pre-inserted tube stiffener to make the product ideal for copper, PEX and CPVC piping systems. The braided polymer fibers of the connector are designed to bend freely without kinking or crimping in tight quarters and resist corrosion caused by chemicals found in common household, tile and glass cleaners. In addition, its reinforced inner hose resists corrosion under harsh water conditions.

    • 1-piece unit combines valve and supply line.
    • Saves time with one less connection.
    • No special installation tools required.
    • Installation ready with pre-inserted tube stiffener.
    • Fast, reliable and secure.
    • Compatible with copper, PEX and CPVC.
    • Remove with combination removal tool or 5/8 in. open end wrench.
    • Connector bends freely without kinking or crimping in tight quarters.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $3.64 $2.00

  • Charlotte Pipe 2 in. PVC DWV 22-1/2-Degree Hub x Hub Street Elbow Fitting

    PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140°F. PVC is lightweight and easy to install. They require no special tools for cutting, and can be installed with solvent cementing, threading, flanging, and roll-grooved joining.

    Green checkmark of qualityEvery item checked for quality
    $5.31 $2.92
X