Showing 1–9 of 52 results
-
Arrowhead Brass Chrome Fine Thread Self Draining Vacuum Breaker
$24.98 $13.74The VPC PK1390 is a replacement self-draining vacuum breaker for frost free hydrants with FINE THREADS (will not connect to hose threaded faucet). A must on all outdoor systems. It can easily be adapted with new installs or existing systems.
- Red brass construction, nickel plated for protection from extreme weather.
- Drains water from faucet upon shut off.
- For replacing leaking vacuum breakers on fine threaded hose-bibs and sillcocks.
- Red brass with 80-83% copper content.
- For outdoor use; not for potable water.
- ASSE 1019 approved; IAMPO certified.
Every item checked for quality -
SharkBite Push-to-Connect Faucet Installation Kit
$36.36 $20.00The SharkBite Faucet Installation Kit has everything you need to install your new faucet. The kit includes 2 SharkBite 1/2 in. x 1/4 in. (3/8 in. O.D.) Push-to-Connect Angle Stop Valves, two 5 ft. coils of 1/4 in. PEX Pipe, two 1/4 in. (3/8 in. O.D.) SharkBite x 1/2 in. Swivel Faucet Connectors, and a 1/2 in. Chrome Trim Cover reversed functions as a disconnect and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up under the sink providing a clean, tangle free look. Once the stop valves are installed, thread the 1/2 in. faucet connectors onto the faucet connections and then measure and cut the PEX and push into the outlet on the stop valve and the faucet connector and the installation is complete.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 24 in. Gas Connector (1/2 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (85,000 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
Every item checked for quality -
Squared, 4-inch Single Handle Bathroom Faucet in Chrome
$90.91 $50.00- Model: A-DIL001 – Dillion Basin Mixer.
- Function: Single Lever Bathroom Mixer/Faucet.
- Configuration: Single-Hole Installation.
- Finish: Chrome.
- Dimensions: 175 mm H x 156 mm D (6.889 in. H x 6.141 in. D)
- Brand: Modern National.
- Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
Every item checked for quality -
Split Basin Faucet with Drain Stopper in Matte Black
$136.36 $75.00This KES bathroom sink faucet is NSF and cUPC certified, compliant with no-lead requirements and California (CEC) Standards. In addition, this KES matte black bathroom faucet is made with no-lead 18/8 stainless steel for safe drinking water. Water safety is our priority! This bathroom faucet also features a high-quality finish passing a rigorous salt spray test for superior corrosion resistance, rustproof and scratch resistance.
Every item checked for quality -
Woodford 1/2 in. x 1/2 in. Brass Sweat x MPT x 8 in. L Freeze-Resistant Anti-Rupture Sillcock Valve
$70.00 $38.50This Woodford Manufacturing Company 1/2 in. x 1/2 in. Brass Sweat x MPT Model 19 anti-rupture sillcock with 8 in. L features a resetting pressure relief valve (PRV) that prevents the faucet tube from rupturing during freezing temperatures, even if a hose is inadvertently connected to the faucet. Use for year-round residential irrigation purposes regardless of the outside temperature. Woodford, The Choice of Professionals.
- Anti-siphon protection.
- Integral backflow device protects up to 125 psi of backpressure, eliminating the need for an add-on vacuum breaker.
- EPDM rubber packing helps prevent leaking behind the packing nut.
- Stainless-steel seat to help prevent wire draw.
- Full-circle operating threads on the valve body and retainer for a secure fit.
- Powder-coated die-cast aluminum oval handle for strength.
- Standard O size seat washer.
- Adjustable polycarbonate wall flange.
- No-lead solder.
- Brass construction.
- 8 in. wall thickness plus the 1 1/4 in. inlet = 9 1/4 in. from the back of the faucet.
Every item checked for quality -
Apollo 3/4 In. X 3/4 In. Pvc Schedule 40 Slip X Slip Ball Valve Pro Pack (12-Pack)
$18.18 $10.00PVC Sch. 40 Ball Valves are compact and lightweight. This Slip x Slip valve is designed for a variety of applications including pressure distribution of cold water in irrigation, pool, spa, agricultural, commercial and light industrial applications and comes in a plastic jar of 12 valves which is convenient, resealable, and reusable. The ball valves are NSF approved and have EPDM seats and O-rings integrated into the durable PVC body.
- PVC schedule 40 construction for durability.
- Full port design allows for maximum efficiency and minimal turbulence or pressure reduction.
- Quarter-turn flow control for easy on and off.
- NSF / ANSI standard 372 certified.
- Slip connections conform to ASTM D2467.
- Working temperature range: 41°F to 122°F (5°C to 55°C).
- Maximum pressure rating 150 psi at 73°F (22°C).
- Requires solvent cement for installation (not included).
- Please note – as temperature increases, working pressure decreases, the optimal working pressure for PVC valves is 150 psi at 73°F (22°C) if the temperature increases above 73°F (22°C), use the PVC. correction factor to determine working pressure, multiply the maximum working pressure by the correction factor, please see correction factor grid on the attached specification sheet.
Every item checked for quality -
FitRite 21 in. x 15 in. Backflow Valve Cover
$27.47 $15.11The FitRite Insulated Backflow/RP Cover ensures you’re ready for the cold weather. 21 in. in length, the 2-1/4 in. in width and 15 in. in height is spacious enough to cover your valve and secure it there for the Winter. The valve cover is a sleek black and is for use as an irrigation system accessory.
- Backflow valve cover.
- Irrigation system accessory.
- 21 in. length, 2-1/4 in. width, 15 in. height.
- Black color.
- Easy installation, installs in seconds.
- Extends your watering season.
- Fits most backflow assemblies.
- Durable weatherproof material, UV and cold resistant.
- Allows backflow devices to function properly.
- Made for virtually all brands of PVB’s and RP’s.
Every item checked for quality -
2-Piece Pack: NIBCO 3/4 in. x 3/4 in. CPVC-CTS 90-Degree Slip x Slip Elbow Fitting
$1.82 $1.002-Piece Pack! Model/Part #C470734. Suited for hot and cold water pressure distribution systems, this 90° slip x slip elbow features female socket connections and is used to easily change the direction of flow. Chlorinated Polyvinyl Chloride (CPVC) has proven to be an excellent material for hot corrosive liquids, hot and cold water distribution, and similar applications above the temperature range of PVC. CPVC will not rust, pit, scale or corrode. CPVC fittings are easy to install and are joined by solvent cementing or threading.
Every item checked for quality
