Showing 1–9 of 52 results
-
BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)
$27.27 $15.00BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. ID (3/8 in. OD).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Squared, 4-inch Single Handle Bathroom Faucet in Chrome
$90.91 $50.00- Model: A-DIL001 – Dillion Basin Mixer.
- Function: Single Lever Bathroom Mixer/Faucet.
- Configuration: Single-Hole Installation.
- Finish: Chrome.
- Dimensions: 175 mm H x 156 mm D (6.889 in. H x 6.141 in. D)
- Brand: Modern National.
- Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
Every item checked for quality -
#1, STRM006CR, Chrome Single Lever Pull-Down Kitchen Faucet
$100.00 $55.00- Model: Star Mini Spring Pull Out Kitchen Mixer – STRM006CR.
- Function: Single Lever Pull-Down Kitchen Mixer/Faucet.
- Configuration: Single-Hole Installation.
- Finish: Chrome.
- Brand: Modern National.
- Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
- Installation Instructions are Included.
Every item checked for quality -
Split Basin Faucet with Drain Stopper in Matte Black
$136.36 $75.00This KES bathroom sink faucet is NSF and cUPC certified, compliant with no-lead requirements and California (CEC) Standards. In addition, this KES matte black bathroom faucet is made with no-lead 18/8 stainless steel for safe drinking water. Water safety is our priority! This bathroom faucet also features a high-quality finish passing a rigorous salt spray test for superior corrosion resistance, rustproof and scratch resistance.
Every item checked for quality -
Advanced Drainage Systems 4 in. Singlewall External Snap Coupler
$4.73 $2.60Advanced Drainage Systems, Inc. (ADS) 4″ Single Wall External Coupler is the contractor’s choice for connecting two sections of 4″ single wall pipe. The coupler snaps over the ends of each section easily for a secure connection. Made of HDPE the 4″ external coupler is designed to last the life of the drainage system.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (3/8 in. O.D.) w/Safety+Plus2 Thermal Excess Flow Valve (33,400 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- The Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Charlotte Pipe 2 in. PVC DWV 22-1/2-Degree Hub x Hub Street Elbow Fitting
$5.31 $2.92PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140°F. PVC is lightweight and easy to install. They require no special tools for cutting, and can be installed with solvent cementing, threading, flanging, and roll-grooved joining.
Every item checked for quality -
SharkBite 1/2 in. Brass Push-to-Connect Dishwasher Installation Kit
$36.36 $20.00The SharkBite Dishwasher Installation Kit has everything you need to install your new dishwasher, it’s fast and simple. Push-to-Connect fittings require no glue, soldering, unions or tools. The kit includes 1 SharkBite 1/2 in. Dual Outlet Angle Stop Valve, 1 SharkBite 1/4 in. x 3/4 in. MPT Elbow, 1 SharkBite 1/4 in. x 3/4 in. GHT Elbow, 1 SharkBite 1/4 in. Stop Valve Adapter, 10 ft. coil of 1/4 in. PEX Pipe, 2 Disconnect Clips (1/2 in. and 1/4 in.). The SharkBite Dual Outlet Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up behind the dishwasher.
- Lead free DZR brass construction for durability and reliability.
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes.
- Innovative push-to-connect design makes for quick and easy installation.
- Push-to-connect fittings require no solder, glue, unions, or tools.
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces.
- Designed for potable water distribution as well as hydronic heating applications.
- Corrosion resistant to improve longevity.
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels.
- Meets all UPC, IPC and cUPC requirements.
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility.
- Rated to 200°F and 200 psi.
- Rated to 200°F and 200 psi.
Every item checked for quality
