Showing 10–18 of 52 results
-
BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve, #73
$5.45 $3.00
BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.
- Compatible with PEX, copper and CPVC.
- Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
- Installation ready: requires no special tools, soldering or glue for a watertight seal.
- 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
- Pre-inserted tube stiffener is “installation ready” for a faster connection.
- Easy-to-remove handle protects against accidental operation during rough-ins.
- Chrome-plated brass.
- Temperature rating: 40° to 160°F.
- Pressure rating: 125 psi maximum.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality -
#2, STRM005CR, Chrome Single Lever Pull-Down Kitchen Faucet
$100.00 $55.00- Model: Star Mini Pull-Out Kitchen Mixer – STRM005CR.
- Function: Single Lever Pull-Down Kitchen Mixer/Faucet.
- Configuration: Single-Hole Installation.
- Finish: Chrome.
- Brand: Modern National.
- Manufacturer: Enping MN Kitchen & Bathroom Co., Ltd.
- Installation Instructions are Included.
Every item checked for quality -
SharkBite Push-to-Connect Faucet Installation Kit
$36.36 $20.00The SharkBite Faucet Installation Kit has everything you need to install your new faucet. The kit includes 2 SharkBite 1/2 in. x 1/4 in. (3/8 in. O.D.) Push-to-Connect Angle Stop Valves, two 5 ft. coils of 1/4 in. PEX Pipe, two 1/4 in. (3/8 in. O.D.) SharkBite x 1/2 in. Swivel Faucet Connectors, and a 1/2 in. Chrome Trim Cover reversed functions as a disconnect and 1/4 in. disconnect clip to remove the pipe from the fitting if needed. The SharkBite Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up under the sink providing a clean, tangle free look. Once the stop valves are installed, thread the 1/2 in. faucet connectors onto the faucet connections and then measure and cut the PEX and push into the outlet on the stop valve and the faucet connector and the installation is complete.
Every item checked for quality -
Charlotte Pipe 3 in. PVC DWV No Hub Adapter
$7.62 $4.19PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140°F. PVC is lightweight and easy to install. They require no special tools for cutting, and can be installed with solvent cementing, threading, flanging, and roll-grooved joining.
Every item checked for quality -
Charlotte Pipe 4 in. x 4 in. x 1-1/2 in. PVC DWV Wye Reducing
$38.82 $21.35PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140F. PVC is lightweight and easy to install. They require no special tools for cutting and can be installed with solvent cementing, threading, flanging and roll-grooved joining.
Every item checked for quality -
HOME-FLEX 1/2 in. CSST x 1/2 in. FIPT Brass Female Adapter
$10.13 $5.57The HOME-FLEX Female Adapter allows you to quickly affix a CSST system to a gas source. Used to attach CSST directly to Steel Pipe. Can attach CSST either the beginning or end of a CSST system.
- Very high quality brass construction.
- 1/2 in. diameter.
- For use with HOME-FLEX CSST systems.
- For use with natural gas or liquid propane.
- CSA and IAPMO certified.
- Not for use with Home Flex UNDERGROUND poly tubing.
- HOME-FLEX Corrugated Stainless Steel Tubing (CSST) flexible gas piping material must be installed by a qualified installer who has been certified in the use of the HOME-FLEX gas piping system.
- Some areas of the United States do not allow installation of CSST for fuel gas piping systems. It is the installer’s responsibility to check and understand all codes governing the location of installation prior to installing HOME-FLEX CSST.
- CSST is generally for indoor use; however, it can be used outdoors and/or underground with very specific parameters.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (3/8 in. O.D.) w/Safety+Plus2 Thermal Excess Flow Valve (33,400 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- The Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Apollo 3/4 in. Brass PEX-B Barb x 3/4 in. Male Pipe Thread Adapter (5-Pack)
$16.45 $9.05The ApolloPEX 3/4 in. Brass PEX Barb x 3/4 in. Male Pipe Thread Adapter is simple to install. ApolloPEX barb fittings are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX adapters can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
- Most economical piping system available.
- Meets UPC, IPC and cUPC standard.
- Can secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves.
- NSF listed.
- Barb x MIP connection for PEX plumbing systems.
- Maximum working pressure of 200 psi and maximum temperature of 200 degree F.
Every item checked for quality
