Showing 37–45 of 52 results
-
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Woodford 1/2 in. x 1/2 in. Brass Sweat x MPT x 8 in. L Freeze-Resistant Anti-Rupture Sillcock Valve
$70.00 $38.50This Woodford Manufacturing Company 1/2 in. x 1/2 in. Brass Sweat x MPT Model 19 anti-rupture sillcock with 8 in. L features a resetting pressure relief valve (PRV) that prevents the faucet tube from rupturing during freezing temperatures, even if a hose is inadvertently connected to the faucet. Use for year-round residential irrigation purposes regardless of the outside temperature. Woodford, The Choice of Professionals.
- Anti-siphon protection.
- Integral backflow device protects up to 125 psi of backpressure, eliminating the need for an add-on vacuum breaker.
- EPDM rubber packing helps prevent leaking behind the packing nut.
- Stainless-steel seat to help prevent wire draw.
- Full-circle operating threads on the valve body and retainer for a secure fit.
- Powder-coated die-cast aluminum oval handle for strength.
- Standard O size seat washer.
- Adjustable polycarbonate wall flange.
- No-lead solder.
- Brass construction.
- 8 in. wall thickness plus the 1 1/4 in. inlet = 9 1/4 in. from the back of the faucet.
Every item checked for quality -
Sharkbite Prolock 1 In. Push-To-connect Plastic 90-Degree Elbow Fitting Pro Pack (3-Pack)
$28.96 $15.93SharkBite ProLock fittings are a versatile and innovative full-flow plumbing system utilizing push lock fitting technology and engineered specifically for use with SharkBite PE-RT and PEX pipe. The SharkBite 1 in. Push-to-Connect 90° Elbow intuitive design makes for one of the simplest and most dependable fittings on the market. No tools are required to make a connection. They use a collet with stainless steel teeth that grips the pipe when fully inserted, and an EPDM O-Ring to provide a permanent, leak-proof seal. The Twist-to-lock technology ensures maximum security. When twisted into place with indicator arrows aligned, the locking cap locks the pipe in place and creates an audible click. Removing a SharkBite fitting is just as easy with no tools needed; simply twist the cap turn counterclockwise to unlock then depress collet against the fitting to remove the pipe. ProLock fittings are suitable for hot and cold potable water and hydronic heating applications. They have been specifically designed for the Professional Plumber. Code approved for behind-the-wall installations.
Every item checked for quality -
Charlotte Pipe 3 in. PVC DWV No Hub Adapter
$7.62 $4.19PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140°F. PVC is lightweight and easy to install. They require no special tools for cutting, and can be installed with solvent cementing, threading, flanging, and roll-grooved joining.
Every item checked for quality -
#63, BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. OD Push Connect Outlet 1/4-Turn Straight Valve
$5.45 $3.00BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. OD Push Connect Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.
- Original retail price: $10.46.
- 1-piece body construction provides strength, durability and long-lasting performance.
- 1/2 in. nominal push connect x 3/8 in. OD push connect.
- Compatible with copper, PEX or CPVC tubing.
- For use in potable water distribution systems, not intended for recirculating water systems that produce continuous use temperatures above 115°F for those applications, use our KT series ball stops.
- Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
- 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
- Easy-to-remove handle protects against accidental operation during rough-ins.
- Installation ready: requires no special tools, soldering to glue for a watertight seal.
Every item checked for quality -
Swiss Madison 0.8/1.28 GPF Wall Mount Dual Flush Actuator Push Button Plate in White
$22.87 $12.58Wall Mount Actuator Flush Push Button Plate in White. This Actuator plate fits with All Swiss Madison Concealed Wall Carriers for use with our wall hung toilets. It features 2 buttons for dual flush compatibility and is very easy to clean.
- Easy to use.
- Plate clips off for easy access to the inner tank and to speedy valve.
- Simple to clean.
- Installation is a snap.
- Easy to clean.
- Actuator plate compatible with Swiss Madison dual flush systems.
Every item checked for quality -
BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (3/8 in. O.D.) w/Safety+Plus2 Thermal Excess Flow Valve (33,400 BTU)
$27.27 $15.00BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. I.D. (3/8 in. O.D.).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- The Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Split Basin Faucet with Drain Stopper in Brushed Nickel
$136.36 $75.00This KES bathroom sink faucet is NSF and cUPC certified, compliant with no-lead requirements and California (CEC) Standards. In addition, this KES brushed nickel bathroom faucet is made with no-lead 18/8 stainless steel for safe drinking water. Water safety is our priority! This bathroom faucet also features a high-quality finish passing a rigorous salt spray test for superior corrosion resistance, rustproof and scratch resistance.
Every item checked for quality -
BrassCraft 1/2 in. Nominal Push Connect x 1/2 in. FIP x 20 in. SpeediOne Braided Faucet Connector and 1/4-Turn Straight Valve
$3.64 $2.00Original Retail Price: $17.75.
BrassCraft’s push connect one-piece water supply combines their trusted brass water valve with their flexible braided polymer connector for one quick easy-to-install solution. BrassCraft’s one-piece connection features push connect technology on the valve inlet and a hand-tighten wing nut on the outlet to provide a significant savings in installation time and cost. Push connect valve inlet requires no special tools to install and comes equipped with a pre-inserted tube stiffener to make the product ideal for copper, PEX and CPVC piping systems. The braided polymer fibers of the connector are designed to bend freely without kinking or crimping in tight quarters and resist corrosion caused by chemicals found in common household, tile and glass cleaners. In addition, its reinforced inner hose resists corrosion under harsh water conditions.
- 1-piece unit combines valve and supply line.
- Saves time with one less connection.
- No special installation tools required.
- Installation ready with pre-inserted tube stiffener.
- Fast, reliable and secure.
- Compatible with copper, PEX and CPVC.
- Remove with combination removal tool or 5/8 in. open end wrench.
- Connector bends freely without kinking or crimping in tight quarters.
- No-lead certified.
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
Every item checked for quality
