The HOME-FLEX Female Adapter allows you to quickly affix a CSST system to a gas source. Used to attach CSST directly to Steel Pipe. Can attach CSST either the beginning or end of a CSST system.
Very high quality brass construction.
1/2 in. diameter.
For use with HOME-FLEX CSST systems.
For use with natural gas or liquid propane.
CSA and IAPMO certified.
Not for use with Home Flex UNDERGROUND poly tubing.
HOME-FLEX Corrugated Stainless Steel Tubing (CSST) flexible gas piping material must be installed by a qualified installer who has been certified in the use of the HOME-FLEX gas piping system.
Some areas of the United States do not allow installation of CSST for fuel gas piping systems. It is the installer’s responsibility to check and understand all codes governing the location of installation prior to installing HOME-FLEX CSST.
CSST is generally for indoor use; however, it can be used outdoors and/or underground with very specific parameters.
BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.
Compatible with PEX, copper and CPVC.
Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
Installation ready: requires no special tools, soldering or glue for a watertight seal.
1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
Pre-inserted tube stiffener is “installation ready” for a faster connection.
Easy-to-remove handle protects against accidental operation during rough-ins.
Chrome-plated brass.
Temperature rating: 40° to 160°F.
Pressure rating: 125 psi maximum.
No-lead certified.
IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
BrassCraft 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression Outlet 1/4 in. Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.
Compatible with copper or PEX (PEX installations require a stainless steel tube insert).
Smooth, quarter-turn operation, ON/OFF flow control with a 90° turn of the handle.
1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
Easy-to-remove handle protects against accidental operation during rough-ins.
1-piece body construction for strength, durability and long-lasting performance.
Chrome-plated brass.
Temperature rating: 40°F to 160°F.
Pressure rating: 125 psi maximum.
No-lead certified.
IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.