Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
  2. Shop
    3. Page 11

Showing 91–99 of 260 results

Filters

  • #5, BrassCraft 1/2 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve

    Gain control of your household plumbing fixtures with this BrassCraft 1/2 in. FIP Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve. Stop the water flow with the 90 degree water handle design and you can perform maintenance and repair without shutting off the water to the entire home. he straight valve is most often used where the water pipe enters the room from the floor.

    • Compatible with iron pipe.
    • Smooth on/off flow control with a quarter turn (90°) turn of the handle.
    • Smooth on/off flow control with a quarter turn (90°) turn of the handle.
    • Easy to install.
    • 1-piece body construction for strength, durability and long-lasting performance.
    • Chrome-plated brass.
    • Temperature rating: 40° to 160°F.
    • Pressure rating: 125 psi maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112,18,1/CSA B125,1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • Arrowhead Brass Chrome Fine Thread Self Draining Vacuum Breaker

    The VPC PK1390 is a replacement self-draining vacuum breaker for frost free hydrants with FINE THREADS (will not connect to hose threaded faucet). A must on all outdoor systems. It can easily be adapted with new installs or existing systems.

    • Red brass construction, nickel plated for protection from extreme weather.
    • Drains water from faucet upon shut off.
    • For replacing leaking vacuum breakers on fine threaded hose-bibs and sillcocks.
    • Red brass with 80-83% copper content.
    • For outdoor use; not for potable water.
    • ASSE 1019 approved; IAMPO certified.
    Green checkmark of qualityEvery item checked for quality
    $24.98 $13.74

  • Wilkins 3/4 in. Lead Free Brass NPT Pressure Relief Valve

    The P1000AXL-150C Pressure Relief Valve is set at 150 psi and utilized on water heating storage vessels for protection against over-temperature or excessive pressure (not for steam service). Primarily used on storage tanks, P1000AXL materials include cast brass or bronze for the main valve body, quality stainless steel 300 series internals, stainless steel springs, and FDA approved, epoxy-coated copper tube probes. Multiple pressure relief settings and inlet/outlet connection options provide easy, ultra versatile installation capabilities, and the P1000AXL assembly shall be used where pressure only relief is required.

    • Eliminates risk of over-pressure of storage tanks.
    • Epoxy-coating adds extra protection.
    • Pressure relief valve set at 150 psi.
    • CSA Compliance to ANSI Z21.22/CSA 4.4.
    • Certified to ASME Section IV by National Board.
    • Pressure relief valve settings of 30, 75, 125, and 150 psi offer versatility.
    Green checkmark of qualityEvery item checked for quality
    $37.40 $20.57

  • BrassCraft 1/2 in. MIP x 1/2 in. MIP x 36 in. Gas Connector (3/8 in. O.D.) w/Safety+Plus2 Thermal Excess Flow Valve (33,400 BTU)

    BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.

    • Corrugated stainless steel with corrosion resistant coating.
    • 1/4 in. I.D. (3/8 in. O.D.).
    • Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
    • Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
    • The Safety+Plus2 TEFV valve helps protect against fires and explosions.
    • Valve has no parts that can break or misalign over time for 24/7 protection.
    • Connector and valve are 100% leak tested.
    • No special tools required for installation.
    • ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
    • Approved for indoor and outdoor use.
    • Temperature rating: -20°F to 150°F.
    • Pressure rating: 1/2 psi maximum.
    • ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
    • Designed, machined and assembled in the USA.
    Green checkmark of qualityEvery item checked for quality
    $27.27 $15.00

  • Intermatic T100 Series 40 Amp 208-277V DPST 24 Hour Mechanical Time Switch Mechanism

    The T100 Series Mechanical Time Switch has proven it can stand the test of time. These dependable time switches can handle electrical loads up to 40 A per pole and allow for up to 12 ON/OFF operations per day. A manual override switch provides added convenience.

    • Direct 24-hour control of most loads.
    • Up to 12 ON/OFF operations each day with minimum ON/OFF times of one hour.
    • Manual override.
    • One ON and one OFF tripper included.
    • Mechanism only.
    • Perfect for use with indoor/outdoor lighting, signs, filters, electric fences, fans, conveyors, pool heaters, blowers, pumps and more.
    Green checkmark of qualityEvery item checked for quality
    $79.98 $43.99

  • Tzumi 7608 UV Sanitizer with Aromatherapy

    Using safe UV-C light, the ionUV Sanitizer effectively eliminates most germs, common pathogenic bacteria and airborne microorganisms, even from the smallest creases and crevices that are difficult-to-impossible to reach with cleaning wipes. Featuring a convenient folding-box design with an extra-deep bed, you have plenty of space to accommodate a wide range of items, whether it be your smartphone or your charger, earbuds, watch, keys, coins, whatever you need to sterilize. For added freshness, a built-in aromatherapy diffuser leaves everything you place within it with a pleasant scentsimply fill the water-tight reservoir with your favorite essential oil, place your item in the bed and close the lid. For liquid-, heat- and chemical-free sanitizing, few methods match UV-C light. Fast and powerful, it fully sanitizes the items you place within the box in as little as ten minutes.

    Green checkmark of qualityEvery item checked for quality
    $9.09 $5.00

  • Johnson Hardware 1060 Soft Close or Soft Open Hardware Kit

    The 1060 Soft Close or Soft Open Hardware Kit makes your sliding doors close or open softly and securely. Doors are smoothly braked and pulled into the opened or closed position. The 1060 Soft Close or Soft Open Hardware Kit can be used in the 1500 Series, 1560 Series and 1562 Series Pocket Door Frames, as well as the 100PD and 100SD Bypass Door Hardware and also with the 2610F Wall-Mount Sliding Door Hardware. The 1060 Soft Close or Soft Open Hardware Kit increases the weight capacity of the applicable pocket door hardware, bypass hardware and wall mounted hardware to 200 lbs. Two 1060 Soft Close or Soft Open Hardware Kits used together can create both a soft open as well as soft close.

    • Only one 1060 soft close or soft open hardware kit may be used in a 24 in. door application.
    • Two 1060 soft close or open hardware kits can be used in doors 28 in. or greater for a soft close and soft open solution.
    • 1060 soft close or soft open hardware kit can be used in a new install or retrofitted into LE Johnson pocket door frames, bypass door hardware, or wall-mount sliding door hardware.
    • Designed for doors up to 200 lbs.
    • 1060 soft close or soft open hardware kit is ADA compliant.
    Green checkmark of qualityEvery item checked for quality
    $54.45 $29.95

  • BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve, #73

    BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.

    • Compatible with PEX, copper and CPVC.
    • Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
    • Installation ready: requires no special tools, soldering or glue for a watertight seal.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Pre-inserted tube stiffener is “installation ready” for a faster connection.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • Chrome-plated brass.
    • Temperature rating: 40° to 160°F.
    • Pressure rating: 125 psi maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • Apollo 1 in. x 1 in. x 1/2 in. Brass PEX-A Expansion Barb Reducing Tee

    The Apollo ExpansionPEX 1 in. x 1 in. x 1/2 in. Brass PEX-A Barb Reducing Tee is simple to install. Apollo ExpansionPEX barb fittings are a key component to one of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, Apollo ExpansionPEX couplings must be secured into place with Apollo ExpansionPEX sleeves or comparable expansion-type sleeve or ring (all sold separately). The Apollo ExpansionPEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

    • Individually bagged.
    • Larger internal diameter of Apollo ExpansionPEX fittings results in a 25% greater flow rate within the system.
    • Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength.
    • Cold-expansion tool (sold separately) is required for installation.
    • Meets or exceeds ASTM F1960 standard.
    • Meets UPC, IPC and cUPC standard.
    • Barb x Barb x Barb connection for PEX-A plumbing systems.
    • NSF listed.
    • Rated to 200 degree F and 200 psi.
    • Item is not compatible with PEXb pipe, crimp-style (ASTM 1807) or pinch clamp (ASTM F2098) piping systems.
    Green checkmark of qualityEvery item checked for quality
    $14.27 $7.85
X