Showing 190–198 of 260 results
-
Frost King E/O 3/8 in. Dia Contractor Pack Caulk Backer Rod
$31.27 $17.20The Thermwell Products 3/8 in. Dia Caulk Saver Contractor Pack helps insulate and cushion while reducing the amount of caulk needed to fill or seal large openings. Use to back fill large gaps before applying caulk (caulk sold separately). Helps insulate and cushion while reducing the amount of caulk needed to fill or seal large openings.
Every item checked for quality -
Apollo 1/2 in. x 1/2 in. CPVC CTS Slip Stainless Steel MPT Adapter
$6.58 $3.62The Apollo 1/2 in. CPVC x Male Threaded Transition Adapter is simple to install and is designed for transitioning from CPVC to alternative piping systems. It is designed for use within hot and cold water pressure piping systems in all commercial and residential applications. The CPVC x Male Threaded Transition Adapter features a female solvent weld socket and a male threaded stainless steel connection. The fitting is used in applications where a change in the piping material is necessary.
- Compatible with CPVC pipe.
- Solvent weld slip x stainless steel male pipe thread (MPT) connection.
- Not compatible with gases or compressed air.
- Used to transition from CPVC piping system to alternative piping systems.
- NSF Listed.
- Meets UPC, IPC and cUPC standard.
Every item checked for quality -
PEX-a Expansion Tool (Tool-Only)
$99.98 $54.99The Apollo ExpansionPEX Expansion Tool is a bare tool without expander heads. When combined with Apollo ExpansionPEX Expander Heads, the tool provides consistent and reliable expansion of Apollo ExpansionPEX tubing. The Apollo ExpansionPEX system is a comprehensive piping system comprised of lead free brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed…
Every item checked for quality -
BrassCraft 1/2 in. MIP x 3/8 in. FIP x 24 in. Stainless Steel Gas Connector w/Safety+Plus2 Thermal Excess Flow Valve (36,800 BTU)
$27.27 $15.00BrassCraft’s Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400°F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating.
- 1/4 in. ID (3/8 in. OD).
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures.
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters.
- Safety+Plus2 TEFV valve helps protect against fires and explosions.
- Valve has no parts that can break or misalign over time for 24/7 protection.
- Connector and valve are 100% leak tested.
- No special tools required for installation.
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt.
- Approved for indoor and outdoor use.
- Temperature rating: -20°F to 150°F.
- Pressure rating: 1/2 psi maximum.
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17.
- Designed, machined and assembled in the USA.
Every item checked for quality -
Clopay Garage Door Keyed Lock Set
$32.98 $18.14Provide additional security for your garage door with the Clopay Garage Door Keyed Lock Set. This lock set can be used for garage doors up to 18 ft. wide. It includes everything needed to replace the garage door lock system.
- Lock can be operated from inside or outside the garage.
- Includes 2 pre cut keys.
- Easily installs with a drill and screwdriver.
- Not recommended for use on doors with a garage door opener.
Every item checked for quality -
SharkBite 1/2 in. Brass Push-to-Connect Dishwasher Installation Kit
$36.36 $20.00The SharkBite Dishwasher Installation Kit has everything you need to install your new dishwasher, it’s fast and simple. Push-to-Connect fittings require no glue, soldering, unions or tools. The kit includes 1 SharkBite 1/2 in. Dual Outlet Angle Stop Valve, 1 SharkBite 1/4 in. x 3/4 in. MPT Elbow, 1 SharkBite 1/4 in. x 3/4 in. GHT Elbow, 1 SharkBite 1/4 in. Stop Valve Adapter, 10 ft. coil of 1/4 in. PEX Pipe, 2 Disconnect Clips (1/2 in. and 1/4 in.). The SharkBite Dual Outlet Angle Stop Valves work with copper, PEX or CPVC. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included PEX coils can be cut to the exact length needed so there is no excess supply line to coil up behind the dishwasher.
- Lead free DZR brass construction for durability and reliability.
- Use to connect to any combination of copper, PEX, CPVC or PE-RT pipes.
- Innovative push-to-connect design makes for quick and easy installation.
- Push-to-connect fittings require no solder, glue, unions, or tools.
- Fitting can be rotated on pipe after installation making it easier to work in tight spaces.
- Designed for potable water distribution as well as hydronic heating applications.
- Corrosion resistant to improve longevity.
- Certified as a manufactured joint and for underground and behind-the-wall applications without access panels.
- Meets all UPC, IPC and cUPC requirements.
- Demount clip allows user to release the fitting from the pipe for convenient installation flexibility.
- Rated to 200°F and 200 psi.
- Rated to 200°F and 200 psi.
Every item checked for quality -
Powercare MTD/Cub Cadet SLT 50 in. Tractor Deck Belt
$45.49 $25.02The Kevlar V-Belts are durable and long lasting versus many of the V-Belts which are made with Polyester Cords. The Kevlar V-Belts are manufactured to withstand the heat, oil, and back idler pulleys often associated with outdoor power equipment. Kevlar belts also offer high tensile strength, non-extensibility, and high resistance to shock loads.
- Mower blade drive belt.
- For MTD/Cub Cadet and Toro/wheel horse riding mowers.
- Fits multiple models of MTD/Cub Cadet and Toro/wheel horse riding mowers.
- Kevlar cords are durable and long lasting.
Every item checked for quality -
Husky 50 ft. 16/2 Indoor/Outdoor Extension Cord, Green
$17.96 $9.88This Husky 50 ft. 16/2 2-pronged Extension Cord is versatile for indoor/outdoor job sites and household use. Rated for 13 Amp and 125-Volt. Reinforced blades and molded plugs prevent accidental bending and breaking. cULus Listed. Medium-duty, Durable and Flexible.
- Durable cord is designed to withstand temperatures from minus 40°F up to 167°F.
- 50 ft. 2-prong extension cord may be used with power tools and appliances for light duty applications inside and outside of your homes.
- For indoor/outdoor use.
- 13 Amp, 125-Volt, 1625 maximum watt capacity.
- Each plug has 2 prongs.
Every item checked for quality
