Call us toll free: (562) 622-0222
Send us an email: info@saleoverstock.com
  1. Home
  2. Shop
    3. Page 7

Showing 55–63 of 260 results

Filters

  • ECHO YOUCAN Fuel System Kit 225 Series Models

    Keep your ECHO equipment running like new by extending engine performance and longevity with the 90127Y Fuel System Kit. Fuel system components are vital to engine health. Regular fuel system maintenance will prevent dirt and debris from entering your carburetor. Blocked or partially clogged fuel filters will cause hard starting and low power output. Being proactive with routine maintenance can save you time, money, and downtime. The Fuel System Kit contains genuine ECHO replacement parts.

    • Includes: fuel filter, fuel lines, grommet, fuel cap, gasket, fuel tank vent and purge bulb.
    • For use on: ECHO trimmers, brushcutters, edgers, and power attachment series (PAS).
    • Fits models: GT-225/i/L/SF, SRM-225/i/SB/U, PE-225, PAS-225/SB.
    • Fuel components should be inspected every 3 months or 90 hours, or per your operators manual, and replaced on a yearly basis.
    • Product is regulated for use with off-road engines and equipment under EPA 40 CFR Part 1060 and must be used on engines/equipment built after 1/1/2012.
    Green checkmark of qualityEvery item checked for quality
    $14.98 $8.24

  • HALO RL56 Series 5/6 in. Recessed LED retrofit module Selectable CCT and Lumens, Integrated LED Matte White

    The RL56 is a 5/6 in. aperture recessed LED baffle trim retrofit module suitable for new construction, remodel and retrofit installation. This product is perfect for residential applications and easily installs in existing 5 in. and 6 in. housings. The field-selectable color temperature switch allows users to chose between 6 different color temperatures for the desired application need. Choose from 2700K warm light to 5000K cool light or set the mood using the Dim-to-Warm option. This product delivers 600 nominal Lumens, great for standard ceiling heights. The RL series is air-tite, wet location Listed and perfect for virtually all residential applications.

    • 5/6 in. aperture.
    • Recessed baffle trim.
    • Retrofits into existing 5 in. and 6 in. housings.
    • 6-selectable color temperature options: dim-to-warm, 2700K, 3000K, 3500K, 4000K, 5000K.
    • Dim-to-warm technology included: use your dimmer to warm color temperature from 3000K to 1800K.
    • Selectable lumens: choose between 900 and 1200-nominal Lumens.
    • 120-Volt input, phase cut dimming to 5%.
    • Air-tite and wet location Listed.
    • Perfect for residential applications.
    Green checkmark of qualityEvery item checked for quality
    $24.96 $13.73

  • BrassCraft 1/2 in. Push Connect Inlet x 3/8 in. Compression Outlet 1/4-Turn Straight Valve, #73

    BrassCraft 1/2 in. Nominal Push Connect Inlet x 3/8 in. O.D. Compression Outlet 1/4-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. With a 90° turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home. Push Connect valves are installation ready requiring no special tools, soldering or glue for a watertight seal.

    • Compatible with PEX, copper and CPVC.
    • Smooth, quarter-turn operation, on/off flow control with a 90° turn of the handle.
    • Installation ready: requires no special tools, soldering or glue for a watertight seal.
    • 1-piece shut-off mechanism ensures smooth operation without freeze-ups even after long periods without use.
    • Pre-inserted tube stiffener is “installation ready” for a faster connection.
    • Easy-to-remove handle protects against accidental operation during rough-ins.
    • Chrome-plated brass.
    • Temperature rating: 40° to 160°F.
    • Pressure rating: 125 psi maximum.
    • No-lead certified.
    • IAPMO and CSA listed to ASME A112.18.1/CSA B125.1.
    Green checkmark of qualityEvery item checked for quality
    $5.45 $3.00

  • SunTouch Floor Warming 4 ft. x 30 in. 120-Volt Radiant Floor Heating Mat (Covers 10 sq. ft.)

    The SunTouch Floor Heating Mat measures 4 ft. x 30 in. and offers an ultra-thin, low-profile system that installs beneath tile, stone and even vinyl or laminate flooring. Its ideal for remodeling bathrooms and kitchens to add radiant floor heating and offers an upscale option when designing new construction floor warming. Dual-wire technology reduces electromagnetic fields (EMF) to ultra-low levels. The mat is an energy-efficient touch of radiant floor warming luxury for your home, is UL listed, and comes with detailed installation instructions.

    • Install the heated floor mat below ceramic or porcelain tile, stone or brick floors or in a self-leveling mortar bed below vinyl floors, floating wood- and laminate floors.
    • For indoor floor-warming use only.
    • Open-weave construction for easy application of thin-set and mortar without compromising the bond of your floor covering to the sub-floor.
    • Dual wire technology keeps EMF to ultra-low levels.
    • UL listed for safety.
    • Energy efficient, inexpensive to operate.
    • Armored power lead wire straight to the electrical box, no conduit required.
    • Single-point power connection to facilitate layout and wiring.
    • Mats can be connected in parallel for larger floor surfaces.
    • Can be combined with a programmable thermostat control (not included).
    Green checkmark of qualityEvery item checked for quality
    $169.51 $93.23

  • ClosetMaid SuperSlide 6.3 mm. Preloaded Back Wall Clips (48-Pack)

    The ClosetMaid Preloaded Back Wall Clips (48-Pack) help you anchor wire shelving to a drywall. Constructed from strong plastic, these clips install easily with the included push pins. Install easily with push pins (included).

    • For use as part of the ClosetMaid fixed mount system.
    • Should be spaced no further than 12 in. apart.
    • Made of strong plastic.
    • Install easily with push pins (included).
    Green checkmark of qualityEvery item checked for quality
    $14.47 $7.96

  • Halex 1/2 in. Electrical Metallic Tube (EMT) Combination Coupling (25-Pack)

    The UL and cULus safety listed. 1/2 in. Combination Coupling is a standard fitting that is intended for indoor use. The combination coupling is made of zinc, comes with 3 screws and is compatible with EMT conduit. 3 screws included.

    • For indoor use.
    • Made of zinc.
    • Compatible with EMT conduit.
    • Meets UL and cULus requirements.
    Green checkmark of qualityEvery item checked for quality
    $24.87 $13.68

  • Clopay Garage Door Rear Track Hanger Kit

    The Clopay Rear Track Hanger Kit allows for garage door track to be securely mounted to your garage ceiling. It comes as a kit with all the parts you need to assemble the rear track hanger. Works on most residential applications.

    • Can be used on garages with up to 2 ft. of headroom.
    • Galvanized construction for durable and long lasting performance.
    • Pre punched holes allow easy attachment to ceilings with various joist spacings.
    • Durable and long lasting.
    Green checkmark of qualityEvery item checked for quality
    $25.98 $14.29

  • StatGuardPlus Universal Thermostat Guard Clear with Changeable Code Combination Lock

    The StatGuardPlus thermostat cover protects your thermostat and prohibits unwanted tampering while still looking very stylish on your wall. It is fitted with a 3-digit combination lock and the combination code is changeable. It fits most thermostats and is made of high quality poly-carbonate clear plastic.

    • Combination lock with changeable code.
    • Fits over existing thermostat.
    • Stylish high quality clear polycarbonate plastic.
    • Hinged for easy access while open.
    • Slotted on all sides for easy air flow.
    • Fits thermostats up to 7 in. W x 4-7/8 in. H x 2-1/4 in. D.
    • Comes with drywall anchors and screws.
    Green checkmark of qualityEvery item checked for quality
    $19.98 $10.99

  • 1-1/2 in. 90-Degree Electric Metallic Tube (EMT) Elbow

    The corrosion-resistant 1-1/2 in. EMT 90 degree Elbow changes conduit direction while still allowing for easy wire pulling, thanks to its large radius. Usable indoors or outdoors. This elbow meets UL and CSA requirements.

    • Enables a 90 degree change of direction in a run of EMT conduit.
    • Made of galvanized steel for corrosion resistance.
    • UL and CSA Listed.
    • Large radius allows for easy wire pulling.
    Green checkmark of qualityEvery item checked for quality
    $12.27 $6.75
X